0:100 0:100 MemLog inited, TSC freq: 1795916748 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 0:100 0:000 Now is 26.03.2020, 13:40:44 (GMT) 0:100 0:000 Starting Clover revision: 5107 (master, commit a3f3053c3) on American Megatrends EFI 0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x4,0x0)\HD(1,MBR,0x00AA8726,0x3F,0x64000) @BE3D5B18 0:100 0:000 SelfDirPath = \EFI\BOOT 0:101 0:001 Clover : Image base = 0xBA8BB000 1:228 1:126 SimpleTextEx Status=Success 1:228 0:000 === [ Get Smbios ] ============================== 1:228 0:000 Type 16 Index = 0 1:228 0:000 Total Memory Slots Count = 4 1:228 0:000 Type 17 Index = 0 1:228 0:000 Ignoring insane frequency value 0MHz 1:228 0:000 SmbiosTable.Type17->Speed = 0MHz 1:228 0:000 SmbiosTable.Type17->Size = 0MB 1:228 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 1:228 0:000 SmbiosTable.Type17->Vendor = 1:228 0:000 SmbiosTable.Type17->SerialNumber = 1:228 0:000 SmbiosTable.Type17->PartNumber = 1:228 0:000 Type 17 Index = 1 1:228 0:000 Ignoring insane frequency value 0MHz 1:228 0:000 SmbiosTable.Type17->Speed = 0MHz 1:228 0:000 SmbiosTable.Type17->Size = 0MB 1:228 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 1:228 0:000 SmbiosTable.Type17->Vendor = 1:228 0:000 SmbiosTable.Type17->SerialNumber = 1:228 0:000 SmbiosTable.Type17->PartNumber = 1:228 0:000 Type 17 Index = 2 1:228 0:000 SmbiosTable.Type17->Speed = 1600MHz 1:228 0:000 SmbiosTable.Type17->Size = 4096MB 1:228 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 1:228 0:000 SmbiosTable.Type17->Vendor = Samsung 1:228 0:000 SmbiosTable.Type17->SerialNumber = 13CA6696 1:228 0:000 SmbiosTable.Type17->PartNumber = M471B5173BH0-CK0 1:228 0:000 Type 17 Index = 3 1:228 0:000 Ignoring insane frequency value 0MHz 1:228 0:000 SmbiosTable.Type17->Speed = 0MHz 1:228 0:000 SmbiosTable.Type17->Size = 0MB 1:228 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 1:228 0:000 SmbiosTable.Type17->Vendor = 1:228 0:000 SmbiosTable.Type17->SerialNumber = 1:228 0:000 SmbiosTable.Type17->PartNumber = 1:228 0:000 Boot status=0 1:228 0:000 Running on: '730U3E_740U3E' with board 'NP730U3E-X03DE' 1:228 0:000 === [ GetCPUProperties ] ======================== 1:228 0:000 CPU Vendor = 756E6547 Model=306A9 1:228 0:000 The CPU supported SSE4.1 1:228 0:000 BrandString = Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz 1:228 0:000 The CPU supported turbo 1:228 0:000 MSR 0x35 20004 1:228 0:000 MSR 0xE2 before patch 1E008404 1:228 0:000 MSR 0xE2 is locked, PM patches will be turned on 1:228 0:000 MSR 0xCE 00080813_E0011200 1:228 0:000 corrected FLEX_RATIO = 100000 1:228 0:000 MSR 0x1B0 00000000 1:228 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 1:228 0:000 MaxDiv/MinDiv: 18.0/8 1:228 0:000 Turbo: 25/25/25/27 1:228 0:000 Features: 0xBFEBFBFF 1:228 0:000 Threads: 4 1:228 0:000 Cores: 2 1:228 0:000 FSB: 100 MHz 1:228 0:000 CPU: 1800 MHz 1:228 0:000 TSC: 1800 MHz 1:228 0:000 PIS: 100 MHz 1:228 0:000 ExternalClock: 25 MHz 1:228 0:000 === [ GetDevices ] ============================== 1:228 0:000 GOP found at: PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 1:228 0:000 PCI (00|00:00.00) : 8086 0154 class=060000 1:228 0:000 PCI (00|00:01.00) : 8086 0151 class=060400 1:228 0:000 PCI (00|01:00.00) : 1002 6601 class=038000 1:228 0:000 - GFX: Model=AMD Radeon HD 8500/8700M (ATI/AMD) 1:228 0:000 PCI (00|00:02.00) : 8086 0166 class=030000 1:228 0:000 - GOP: Provided by device 1:228 0:000 - GFX: Model=Intel HD Graphics 4000 (Intel) 1:228 0:000 PCI (00|00:14.00) : 8086 1E31 class=0C0330 1:228 0:000 PCI (00|00:16.00) : 8086 1E3A class=078000 1:228 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 1:228 0:000 PCI (00|00:1A.00) : 8086 1E2D class=0C0320 1:228 0:000 PCI (00|00:1B.00) : 8086 1E20 class=040300 1:228 0:000 PCI (00|00:1C.00) : 8086 1E10 class=060400 1:228 0:000 PCI (00|02:00.00) : 8086 088E class=028000 1:228 0:000 - WIFI: Vendor=Intel 1:228 0:000 PCI (00|00:1C.03) : 8086 1E16 class=060400 1:228 0:000 PCI (00|03:00.00) : 10EC 8168 class=020000 1:228 0:000 - LAN: 0 Vendor=Realtek 1:228 0:000 PCI (00|00:1D.00) : 8086 1E26 class=0C0320 1:228 0:000 PCI (00|00:1F.00) : 8086 1E59 class=060100 1:228 0:000 PCI (00|00:1F.02) : 8086 1E03 class=010601 1:228 0:000 PCI (00|00:1F.03) : 8086 1E22 class=0C0500 1:228 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF 1:228 0:000 === [ GetDefaultSettings ] ====================== 1:228 0:000 Clover load options size = 4 bytes 1:233 0:004 CheckOEMPathExists tried EFI\CLOVER\OEM\730U3E_740U3E--00-00-00-00-00-00. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\NP730U3E-X03DE\UEFI. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\730U3E_740U3E. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\730U3E_740U3E-1800. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\NP730U3E-X03DE. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\NP730U3E-X03DE-1800. Dir not exists 1:233 0:000 set OEMPath by default: EFI\CLOVER 1:233 0:000 EFI\CLOVER\AMB.plist not loaded with name from LoadOptions: Not Found 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\730U3E_740U3E--00-00-00-00-00-00. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\NP730U3E-X03DE\UEFI. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\730U3E_740U3E. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\730U3E_740U3E-1800. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\NP730U3E-X03DE. Dir not exists 1:233 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\NP730U3E-X03DE-1800. Dir not exists 1:233 0:000 set OEMPath by default: EFI\CLOVER 1:239 0:006 EFI\CLOVER\config.plist loaded: Success 1:239 0:000 === [ GetListOfThemes ] ========================= 1:240 0:001 - [00]: EMBEDDED 1:243 0:002 - [00]: RANDOM 1:245 0:002 === [ Found config plists ] ===================== 1:245 0:000 - config.plist 1:245 0:000 === [ GetEarlyUserSettings ] ==================== 1:245 0:000 timeout set to 2 1:245 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 1:245 0:000 KextsToPatch: 6 requested 1:245 0:000 - [00]: com.apple.driver.usb.AppleUSBXHCI (remove 15 port limit in 10.13.6) :: BinPatch :: data len: 8 1:245 0:000 - [01]: com.apple.iokit.IOUSBHostFamily (USB Port Limit Patch 1) :: BinPatch :: data len: 4 1:245 0:000 - [02]: com.apple.iokit.IOUSBHostFamily (USB Port Limit Patch 2) :: BinPatch :: data len: 4 1:245 0:000 - [03]: com.apple.driver.usb.AppleUSBXHCI (USB Port Limit Patch 3) :: BinPatch :: data len: 4 1:245 0:000 - [04]: com.apple.driver.usb.AppleUSBXHCI (USB Port Limit Patch 4) :: BinPatch :: data len: 4 1:245 0:000 - [05]: com.apple.iokit.IOGraphicsFamily (Boot graphics glitch 10.13.x (IGPUs)) :: BinPatch :: data len: 5 1:245 0:000 KernelToPatch: 3 requested 1:245 0:000 - [00]: Disable panic kext logging on 10.13 debug kernel (credit vit9696) :: MatchOS: 10.13.x :: data len: 6 1:245 0:000 - [01]: Disable panic kext logging on 10.13 release kernel (credit vit9696) :: MatchOS: 10.13.x :: data len: 6 1:245 0:000 - [02]: Disable panic kext logging on 10.14 release kernel (credit vit9696) :: MatchOS: 10.14.x :: data len: 6 1:245 0:000 Default theme: embedded 1:245 0:000 === [ LoadDrivers ] ============================= 1:248 0:002 Loading ApfsDriverLoader.efi status=Success 1:254 0:006 - driver needs connecting 1:254 0:000 Loading AptioMemoryFix.efi status=Success 1:264 0:009 Loading AudioDxe.efi status=Success 1:275 0:011 - driver needs connecting 1:275 0:000 Loading DataHubDxe.efi status=Success 1:297 0:021 Loading EmuVariableUefi.efi status=Success 1:305 0:007 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success 1:305 0:000 Loading FSInject.efi status=Success 1:313 0:007 Loading SMCHelper-64.efi status=Success 1:319 0:005 Loading VBoxHfs.efi status=Success 1:328 0:009 - driver needs connecting 1:328 0:000 3 drivers needs connecting ... 1:328 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 1:328 0:000 APFS driver loaded 1:328 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 5:587 4:259 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 5:601 0:014 === [ InitScreen ] ============================== 5:601 0:000 Console modes reported: 4, available modes: 5:601 0:000 - [01]: 80x25 (current mode) 5:601 0:000 - [02]: 80x50 5:601 0:000 - [03]: 125x46 5:601 0:000 - [04]: 100x31 5:601 0:000 SetScreenResolution: 1920x1080 - already set 5:601 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x4,0x0)\HD(1,MBR,0x00AA8726,0x3F,0x64000) 5:601 0:000 new SelfHandle=BE3D5B18 5:605 0:003 Using embedded font: Success 5:607 0:001 === [ GetMacAddress ] =========================== 5:607 0:000 MAC address of LAN #0= 18:67:B0:C7:5A:D4: 5:607 0:000 === [ ScanSPD ] ================================= 5:607 0:000 Scanning SMBus [8086:1E22], mmio: 0xF7F15004, ioport: 0xF040, hostc: 0x1 5:626 0:019 Slot: 2 Type 24 4096MB 1600MHz Vendor=Samsung PartNo=M471B5173BH0-CK0 SerialNo=01030C0A06060906 5:627 0:000 === [ GetAcpiTablesList ] ======================= 5:627 0:000 Get Acpi Tables List from RSDT: 5:627 0:000 - [00]: FACP LH43STAR len=132 5:627 0:000 - [01]: APIC LH43STAR len=114 5:627 0:000 - [02]: FPDT LH43STAR len=68 5:627 0:000 - [03]: MCFG LH43STAR len=60 5:627 0:000 - [04]: MSDM LH43STAR len=85 5:627 0:000 - [05]: HPET LH43STAR len=56 5:627 0:000 - [06]: SSDT SataTabl len=789 5:627 0:000 - [07]: SLIC LH43STAR len=374 5:627 0:000 - [08]: SSDT Cpu0Ist len=2300 5:627 0:000 - [09]: SSDT CpuPm len=2830 5:627 0:000 - [10]: DMAR SNB len=184 5:627 0:000 - [11]: BGRT LH43STAR len=56 5:627 0:000 - [12]: BGRT LH43STAR len=56 5:627 0:000 - [13]: SSDT SgTabl len=2019 5:627 0:000 - [14]: SSDT AmdTabl len=3627 5:627 0:000 Calibrated TSC Frequency = 1795916748 = 1795MHz 5:627 0:000 === [ GetUserSettings ] ========================= 5:627 0:000 Add 2 devices (kTagTypeDict): 5:627 0:000 USB FixOwnership: yes 5:627 0:000 Dropping 3 tables: 5:627 0:000 - [00]: Drop table signature="DMAR" (52414D44) 5:627 0:000 - set table: 52414D44, 0 to drop: yes 5:627 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043) 5:627 0:000 - set table: 54445353, 6D50757043 to drop: yes 5:627 0:000 - [02]: Drop table signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043) 5:627 0:000 - set table: 54445353, 74734930757043 to drop: yes 5:628 0:000 - final DSDT Fix mask=00008004 5:628 0:000 PatchesDSDT: 7 requested 5:628 0:000 - [00]: (change GFX0 to IGPU) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:628 0:000 patch disabled at config 5:628 0:000 - [01]: (change SAT0 to SATA) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:628 0:000 - [02]: (change LPC to LPCB) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:628 0:000 - [03]: (Change PEGP to GFX0) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:628 0:000 patch disabled at config 5:628 0:000 - [04]: (change EHC1 to EH01) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:628 0:000 - [05]: (change EHC2 to EH02) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:628 0:000 - [06]: (change H_EC to EC) lenToFind: 4, lenToReplace: 4, Target Bridge: 5:628 0:000 Using ProductName from config: iMac13,2 5:628 0:000 Using latest BiosVersion from config 5:628 0:000 BiosVersion: IM131.88Z.F000.B00.1912181754 5:628 0:000 BiosReleaseDate: 12/18/2019 5:628 0:000 Using latest EfiVersion from clover: 290.0.0.0.0 5:628 0:000 Using FirmwareFeatures from config: 0xE00DE137 5:628 0:000 Using FirmwareFeaturesMask from config: 0xFF1FFF3F 5:628 0:000 Board-ID set from config as Mac-FC02E91DDD3FA6A4 5:628 0:000 BoardType: 0xA 5:628 0:000 ChassisType: 0xD 5:630 0:001 === [ Found DSDT tables ] ======================= 6:601 0:971 === [ ScanVolumes ] ============================= 6:601 0:000 Found 5 volumes with blockIO 6:601 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x4,0x0) 6:603 0:001 Result of bootcode detection: bootable unknown (legacy) 6:603 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x4,0x0)\HD(1,MBR,0x00AA8726,0x3F,0x64000) 6:604 0:001 Result of bootcode detection: bootable unknown (legacy) 6:641 0:037 This is SelfVolume !! 6:641 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x4,0x0)\HD(2,MBR,0x00AA8726,0x6403F,0x3BF3B0) 6:650 0:008 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 6:651 0:001 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,52E632DF-BCB7-49DA-83AC-65974A75E08A,0x800,0xEE7B800) 6:665 0:014 Searching volumes for latest nvram.plist ... 6:665 0:000 loaded Status=Not Found 6:665 0:000 PutNvramPlistToRtVars: nvram.plist not found 6:665 0:000 found 2 handles with audio 6:665 0:000 No AudioIoDevice stored 6:665 0:000 no stored audio parameters 6:665 0:000 Found Audio Device Realtek ALC269 (Speaker) at index 0 6:665 0:000 Found Audio Device Realtek ALC269 (Headphones) at index 1 6:665 0:000 Found Audio Device Intel Panther Point HDMI (HDMI) at index 2 6:665 0:000 === [ InitTheme ] =============================== 6:665 0:000 use daylight theme 6:665 0:000 using embedded theme 6:665 0:000 got embedded sound 6:665 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 6:665 0:000 output to channel 0 with volume 70, len=25600 6:665 0:000 sound channels=2 bits=16 freq=8000 6:666 0:000 sound converted to 48kHz 6:666 0:000 not found AudioIo to play 6:666 0:000 sound play end with status=Not Found 6:668 0:002 Using embedded font: Success 6:669 0:000 theme inited 6:669 0:000 Chosen embedded theme 6:669 0:000 after NVRAM boot-args=-v dart=0 darkwake=10 keepsyms=1 debug=0x100 -wegnoegpu 6:669 0:000 === [ Dump SMC keys from NVRAM ] ================ 6:669 0:000 found AppleSMC protocol 6:669 0:000 Registered 0 SMC keys 6:669 0:000 === [ ScanLoader ] ============================== 6:669 0:000 - [01]: 'CLOVER' 6:670 0:001 AddLoaderEntry for Volume Name=CLOVER 6:670 0:000 skipped because entry is hidden 6:670 0:000 - [02]: 'macOS Base System' 6:699 0:028 AddLoaderEntry for Volume Name=macOS Base System 6:728 0:028 - [04]: 'untitled' 6:728 0:000 === [ AddCustomTool ] =========================== 6:729 0:001 found tool \EFI\CLOVER\tools\Shell64U.efi 6:730 0:001 EmuVariable InstallEmulation: EFI_ALREADY_STARTED 6:730 0:000 === [ GetEfiBootDeviceFromNvram ] =============== 6:730 0:000 Default boot entry not found 6:730 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 6:730 0:000 DefaultIndex=-1 and MainMenu.Entries.size()=6 6:848 0:117 GUI ready