Ozmosis 1749 Flashing Question [English]

    Hi guys!


    I decided to re-flash Ozmosis, because the BIOS setup got frozen a couple of times, and I want to make sure everything works fine before I install El Cap. However, I don't have a dedicated GFX card anymore, only HD4000. My question is, with a freshly flashed Ozmosis, will I get picture from the screen, to setup the BIOS, without a GFX card? I guess the answer should be yes, I just want to make it sure.


    Thanks in advance!

    Gigabyte Z77-DS3H [Ozmosis 167X] - i5 3570k - HD3000 - 8GB Corsair Vengeance 1600Mhz - Samsung 840 Pro 256GB SSD [OS X 10.11.2] / 1TB Seagate HDD [symlinked user folders] / 1TB Seagate HDD [Windows 8.1] / 1TB WD Green HDD [Time Machine]

    I thought I keep Ozmosis, in case it is going to be updated. Also, aren't there any data left, El Captain can use from Ozmosis?

    Gigabyte Z77-DS3H [Ozmosis 167X] - i5 3570k - HD3000 - 8GB Corsair Vengeance 1600Mhz - Samsung 840 Pro 256GB SSD [OS X 10.11.2] / 1TB Seagate HDD [symlinked user folders] / 1TB Seagate HDD [Windows 8.1] / 1TB WD Green HDD [Time Machine]

    I read about it... Anyway, hope dies last.
    Anyhow, is there any advantage of keeping Ozmosis? I've read in a guide, that the system still can use some data from it, is that so?

    Gigabyte Z77-DS3H [Ozmosis 167X] - i5 3570k - HD3000 - 8GB Corsair Vengeance 1600Mhz - Samsung 840 Pro 256GB SSD [OS X 10.11.2] / 1TB Seagate HDD [symlinked user folders] / 1TB Seagate HDD [Windows 8.1] / 1TB WD Green HDD [Time Machine]

    You can use Ozmosis with El Capitan. But there are one step more to do as with Yosemite. You must install Clover to your El Capitan Installer and put the needed Kexts (FakeSMC for example) into /EFI/CLOVER/kexts/10.11. After Installation your 1st boot to your new system you must use Clover from your Installer Partition (or USB-Stick) again. Install the extra Kexts in /S/L/E with KextWizzard on your new system. Before you do this you have to disable SIP. You can do it this way in Terminal:


    Code
    1. sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:csr-active-config=%67%00%00%00


    Reboot, install the Kexts with the Wizzard, repair permissions, rebuild Kext-Cache. Than in Terminal activate SIP again


    Code
    1. sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:csr-active-config=%00%00%00%00


    and reboot.


    Now you can use El Capitan with Ozmosis. I did it last weekend on my Hack. No Problems so far.

    Intel Systeme
    Commodore

    Einmal editiert, zuletzt von Sascha_77 ()

    Thanks for the input, I re-flashed Ozmosis and I managed to install 10.11, but there are some weirdness going on, that I don't really understand: http://hackintosh-forum.de/ind…age=Thread&threadID=23838


    :vote4close:

    Gigabyte Z77-DS3H [Ozmosis 167X] - i5 3570k - HD3000 - 8GB Corsair Vengeance 1600Mhz - Samsung 840 Pro 256GB SSD [OS X 10.11.2] / 1TB Seagate HDD [symlinked user folders] / 1TB Seagate HDD [Windows 8.1] / 1TB WD Green HDD [Time Machine]

  • griven

    Hat das Label Erledigt hinzugefügt