DSDT fix Z87MX-D3H (OZ167X)

Try the attached one and give a feedback please. I see that you use Ozmosis so I left layout-id of the ALC892 in the dsdt. Otherwise, with Clover bootloader, I would suggest to remove it so it works perfect with toleda patch. But in your case not necessary.
Also HDMI over HD4600 should work.

Edit: removed my DSDT because of the fu**ing El Capitan I just forgot to edit XHC (I'm still on Mavericks) and the rest. So please use the DSDT from al6042 which you can find next posting

Good Morning nikoZ

Please try the attached DSDT, which only uses the standard Patches for your Z87MX-D3H, which contain a couple of WAK-Fixes for XHC and EHC1 and EHC2.

On the other hand make sure that all the Wake-On-Whatever features in your BIOS are disabled.

So, sorry again. Here is my new one with patches for EC and the rest of the necessary stuff. But keep in mind that EC is using only 15 usb ports and this board has 21 (I guess). For my testing with EC I've removed the internal boards so that I've no problems with 10.11 and USB.
I don't know how it is with Ozmosis if there is a usb-port fix integrated (to use more than 15)

In that case delete the file and we try again in the evening.

@nicoZ

The problem is that I can't test because I use clover and for me WOL works great (enabled in UEFI).
So there are some questions we should know:
- which system definition do you use for your system?
- which kext are you using for your lan?
- do you use the internal usb ports?

The latter one I'm asking is that during my test with EC I've removed all the unnecessary usb ports to reach the 15 ports limit of EC. That means all HSxx and SSXX which belong to the internal connectors were deleted from DSDT so that you don't need any special kexts (to be Vanilla). As a side effect the interal ports don't work anymore. If you need more connections like the ones on the back you need a usb-hub (like an original one which even doesn't have more usb-ports).

If you really need WOL than I would suggest to go the Clover-route and you're on a safe side. Don't be affraid I can help you with a clover config.plist and also the rest which is needed.

Ok, good to read that wol is working. The ethernet-kext is the best you can use. Also smbios is great.
Do you know to which internal connector your front-usb is connected?
About sound I guess you can go the multibeast route. When I was using Ozmosis with my Z77MX-D3H, also ALC892, I was using MB 6.0.1 (but it was for Mavericks). Now I'm using toleda patch for my Z87MX-D3H for clover. For Ozmosis with EC I really don't know which way to go for. Maybe al6042 has an idea for that.
When I've tested EC with my Z87MX I had no problems with pen drive plugged in. Maybe due to the modded DSDT.
When I'm back home in the afternoon I will check again

Ok, so try the attached DSDT but before remove all your usb-patches-kext which you use for EC and test if the front usb is working and if yes if your hacki stays asleep when thumb drive is plugged in.

Edit: Stooopppp. You wrote, that your hackintosh immidiatly starts after shutdown or hibernate when a thumb drive is plugged in? Is your hackintosh off when you shut him down via OSX and no thumb drive is plugged? I had the problem that my hackintosh automatically starts after shutdown. I've tested several things in UEFI/DSDT or removed external attached things but nothing worked. Finally I've tried the option "FixShutdown" under Clover configurator within "ACPI" => "Fixes". This resulted to the entry

in config.plist under "ACPI/DSDT". At this moment my hackintosh was off and also wol worked. How to get this command into Ozmosis, I've no idea. Maybe you can ask one of the Ozmosis experts for a help.

Within Maciasl is a patch for Gigabyte Boards maintained by Pjalm.
Maybe that helps

Do you mean that for Z87MX? It's already in the DSDT but doesn't work. He has even one to fix shutdown but also a no-go

Gesendet von iPhone mit Tapatalk

Thanks for the feedback. I know why the 2nd USB-port isn't working. I've removed HS02 (USB2.0) and SSP2 (USB3.0) from DSDT which belong to the internal USB3.0-connector. This connector needs HS01, HS02 (both USB2.0) and SSP1/SSP2 (for USB3.0) from the DSDT. So I've to do it again.
The main problem you have is the fu**ing shutdown problem. When you can fix it, like I did with Clover, than every problem is solved (beside this with the usb3.0) and your machine runs better than an original iMac
Maybe someone of the Ozmosis Gurus know how to add this above mentioned ShutdownFix which you can use easily with Clover.

Edit: I'v attached a modded DSDT (still with the missing USB3.0 port) to test if shutdown is working (is a patch from rehabman). Please test if its working

For sound just buy a cheap and good usb soundcard and you will be happy.
For shutdown just see my post above yours.

Edit: another DSDT with a possible shutdown fix. Please try and give feedback (still with the missing usb3.0 port - this can be solved easily)

Thanks for the feedback but I also want to know which DSDT of the two I posted yesterday evening fixed the shutdown issue?
Another question: Did you enable wake from USB-keyboard or usb-mouse in Bios?