Hallo,
ich habe ein Problem mit Clover, ich bekomme die HD 4600 einfach nicht zum Laufen. 
Ich habe schon alles probiert was ich hier im Forum gefunden habe. Gibt es hier einen Clover Spezialisten der mir helfen kann? Anbei meine Config.plist
Clover Intel HD4600 Probleme
-
- Erledigt
- saez
- Erledigt
-
-
Hi, geht es um das Gerät aus deiner Signatur?
Da wird noch von Ozmosis geredet...
Mit dieser fast leeren Config.plist kann ich keine Tipps zu nächsten Schritten abgeben..
Welche Version von Clover hast du im Einsatz und welche Kexte liegen dort mit drinnen? -
Config von ACPI Einträgen befreien mit dieser dann in das System booten mit DPCIManager eine DSDT erstellen und mit ssdtPRGen eine SSDT diese beiden dann hier hoch laden.
-
Ich konnte jetzt High Sierra installieren aber die Grafik ist immer noch bei 7MB. Mit Ozmosis kann ich kein High Sierra installieren deshalb möchte ich auf Clover wechseln. Ich benutze die Letzte Version von Clover.
Anbei die Dateien. -
Na dann viel Spaß damit.
Die Kexte wie auf dem Bild zu sehen in den Ordner, die SSDT und DSDT auch wie auf dem Bild.
Bei deiner config alles raus so wie auf den Bildern.
-
Vielen Dank aber er bootet nicht durch.
Ich versuch es mal im verbiose modus mal gucken wo er hängt -
probier es mal mit der
-
Leider kein Erfolg. Ich kann jetzt wieder booten, der Intelbacklight.kext war das Problem habe ich jetzt weg gelassen. Mit der zuerst erstellten Dsdt läuft der boot nicht durch, bei der zweiten schon aber immer noch 7mb Grafik.
Anbei mein bootlog0:100 0:100 MemLog inited, TSC freq: 3092842280
0:100 0:000
0:100 0:000 Now is 23.12.2017, 20:45:10 (GMT)
0:100 0:000 Starting Clover revision: 4359 on American Megatrends EFI
0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 9.2]
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,610F388F-40E5-49D2-954A-84641CBC7F4A,0x28,0x64000) @CB80B118
0:100 0:000 SelfDirPath = \EFI\BOOT
0:100 0:000 === [ Get Smbios ] ========================================
0:100 0:000 Type 16 Index = 0
0:100 0:000 Total Memory Slots Count = 2
0:100 0:000 Type 17 Index = 0
0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz
0:100 0:000 SmbiosTable.Type17->Size = 8192MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100 0:000 SmbiosTable.Type17->Vendor = 1311
0:100 0:000 SmbiosTable.Type17->SerialNumber = 068D0E3C
0:100 0:000 SmbiosTable.Type17->PartNumber = M2F8G64CB8HB5N-DI
0:100 0:000 Type 17 Index = 1
0:100 0:000 Ignoring insane frequency value 0MHz
0:100 0:000 SmbiosTable.Type17->Speed = 0MHz
0:100 0:000 SmbiosTable.Type17->Size = 0MB
0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100 0:000 SmbiosTable.Type17->Vendor = <null string>
0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string>
0:100 0:000 SmbiosTable.Type17->PartNumber = <null string>
0:100 0:000 Boot status=0
0:100 0:000 Running on: 'B85M-HD3' with board 'B85M-HD3'
0:100 0:000 === [ GetCPUProperties ] ==================================
0:100 0:000 CPU Vendor = 756E6547 Model=306C3
0:100 0:000 The CPU supported SSE4.1
0:100 0:000 BrandString = Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz
0:100 0:000 The CPU supported turbo
0:100 0:000 MSR 0x35 40004
0:100 0:000 MSR 0xE2 before patch 1E000402
0:100 0:000 MSR 0xCE 00080838_F3011F00
0:100 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100 0:000 MaxDiv/MinDiv: 31.0/8
0:100 0:000 Turbo: 31/32/33/33
0:100 0:000 Features: 0xBFEBFBFF
0:100 0:000 Threads: 4
0:100 0:000 Cores: 4
0:100 0:000 FSB: 100 MHz
0:100 0:000 CPU: 3100 MHz
0:100 0:000 TSC: 3100 MHz
0:100 0:000 PIS: 100 MHz
0:100 0:000 ExternalClock: 25 MHz
0:100 0:000 === [ GetDevices ] ========================================
0:100 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000
0:100 0:000 PCI (00|00:02.00) : 8086 0412 class=030000
0:100 0:000 - GFX: Model=Intel HD Graphics 4600 (Intel)
0:100 0:000 PCI (00|00:03.00) : 8086 0C0C class=040300
0:100 0:000 PCI (00|00:14.00) : 8086 8C31 class=0C0330
0:100 0:000 PCI (00|00:16.00) : 8086 8C3A class=078000
0:100 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:100 0:000 PCI (00|00:16.03) : 8086 8C3D class=070002
0:100 0:000 PCI (00|00:1A.00) : 8086 8C2D class=0C0320
0:100 0:000 PCI (00|00:1B.00) : 8086 8C20 class=040300
0:100 0:000 PCI (00|00:1C.00) : 8086 8C10 class=060400
0:100 0:000 PCI (00|00:1C.02) : 8086 8C14 class=060400
0:100 0:000 PCI (00|02:00.00) : 10EC 8168 class=020000
0:100 0:000 - LAN: 0 Vendor=Realtek
0:100 0:000 PCI (00|00:1C.03) : 8086 8C16 class=060400
0:100 0:000 PCI (00|03:00.00) : 8086 244E class=060401
0:100 0:000 PCI (00|00:1C.05) : 8086 8C1A class=060400
0:100 0:000 PCI (00|05:00.00) : 168C 0030 class=028000
0:100 0:000 - WIFI: Vendor=Atheros
0:100 0:000 PCI (00|00:1D.00) : 8086 8C26 class=0C0320
0:100 0:000 PCI (00|00:1F.00) : 8086 8C50 class=060100
0:100 0:000 PCI (00|00:1F.02) : 8086 8C02 class=010601
0:100 0:000 PCI (00|00:1F.03) : 8086 8C22 class=0C0500
0:100 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:100 0:000 === [ GetDefaultSettings ] ================================
0:100 0:000 Clover load options size = 0 bytes
0:104 0:003 EFI\CLOVER\config.plist loaded: Success
0:104 0:000 === [ GetListOfThemes ] ===================================
0:104 0:000 - [00]: newyear
0:106 0:001 - [01]: christmas
0:106 0:000 - [02]: BGM
0:109 0:002 - [03]: random
0:109 0:000 - [03]: embedded
0:110 0:001 === [ Found config plists ] ===============================
0:110 0:000 - config.plist
0:110 0:000 === [ GetEarlyUserSettings ] ==============================
0:110 0:000 timeout set to 2
0:110 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:110 0:000 Default theme: BGM
0:110 0:000 Hiding entries with string Preboot
0:110 0:000 === [ LoadDrivers ] =======================================
0:111 0:000 Loading OsxFatBinaryDrv-64.efi status=Success
0:111 0:000 Loading AppleImageCodec-64.efi status=Success
0:111 0:000 Loading AppleUITheme-64.efi status=Success
0:111 0:000 Loading DataHubDxe-64.efi status=Success
0:119 0:007 Loading AppleKeyAggregator-64.efi status=Success
0:119 0:000 Loading VBoxHfs-64.efi status=Success
0:119 0:000 - driver needs connecting
0:119 0:000 Loading FSInject-64.efi status=Success
0:119 0:000 Loading FirmwareVolume-64.efi status=Success
0:120 0:000 Loading SMCHelper-64.efi status=Success
0:120 0:000 Loading apfs.efi status=Success
0:125 0:004 - driver needs connecting
0:125 0:000 Loading OsxAptioFix2Drv-64.efi status=Success
0:126 0:001 2 drivers needs connecting ...
0:126 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
0:126 0:000 APFS driver loaded
0:126 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:539 0:412 === [ InitScreen ] ========================================
0:539 0:000 SetScreenResolution: 1920x1080 - setting Mode 4
0:742 0:203 Video mode change to mode #4: Success
0:742 0:000 Console modes reported: 6, available modes:
0:742 0:000 - [01]: 80x25 (current mode)
0:742 0:000 - [02]: 80x50
0:742 0:000 - [03]: 100x31
0:742 0:000 - [04]: 128x30
0:742 0:000 - [06]: 120x50
0:742 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,610F388F-40E5-49D2-954A-84641CBC7F4A,0x28,0x64000)
0:742 0:000 Using embedded font: Success
0:860 0:117 === [ GetMacAddress ] =====================================
0:860 0:000 MAC address of LAN #0= 94:DE:80:BC:39:8A:
0:860 0:000 === [ ScanSPD ] ===========================================
0:860 0:000 SMBus device : 8086 8C22 class=0C0500 status=Success
0:860 0:000 SMBus CmdReg: 0x1
0:860 0:000 Scanning SMBus [8086:8C22], mmio: 0xF7E19004, ioport: 0xF040, hostc: 0x11
0:860 0:000 Slots to scan [8]...
0:861 0:000 SPD[0]: Type 11 @0x50
0:879 0:017 DDR speed 1600MHz
0:879 0:000 Slot: 0 Type 24 8192MB 1600MHz Vendor=Nanya Technology PartNo=M2F8G64CB8HB5N-DI SerialNo=0006080D000E030C
0:879 0:000 SPD[2]: Type 11 @0x52
0:898 0:018 DDR speed 1600MHz
0:898 0:000 Slot: 2 Type 24 4096MB 1600MHz Vendor=SK Hynix PartNo=HMT451U6AFR8C-PBN0 SerialNo=000003020D0B0609
0:898 0:000 === [ GetAcpiTablesList ] =================================
0:898 0:000 Get Acpi Tables List from RSDT:
0:898 0:000 - [00]: FACP A M I len=132
0:898 0:000 - [01]: APIC A M I len=114
0:898 0:000 - [02]: FPDT A M I len=68
0:898 0:000 - [03]: SSDT Cpu0Ist len=1337
0:898 0:000 - [04]: SSDT CpuPm len=2776
0:898 0:000 - [05]: MCFG A M I len=60
0:898 0:000 - [06]: HPET A M I len=56
0:898 0:000 - [07]: SSDT SataTabl len=877
0:898 0:000 - [08]: SSDT SaSsdt len=13537
0:898 0:000 - [09]: BGRT A M I len=56
0:898 0:000 Calibrated TSC Frequency = 3092842280 = 3092MHz
0:899 0:000 === [ GetUserSettings ] ===================================
0:899 0:000 - final DSDT Fix mask=00000000
0:899 0:000 Using ProductName from config
0:899 0:000 ProductName: iMac18,2
0:899 0:000 Found same BiosVersion in clover and config
0:899 0:000 BiosVersion: IM183.88Z.0151.B00.1708080034
0:899 0:000 BiosReleaseDate: 08/08/2017
0:899 0:000 Using FirmwareFeatures from config
0:899 0:000 FirmwareFeatures: 0xFC0FE136
0:899 0:000 Using FirmwareFeaturesMask from config
0:899 0:000 FirmwareFeaturesMask: 0xFF1FFF3F
0:899 0:000 PlatformFeature: 0x0
0:899 0:000 Board-ID set from config as Mac-77F17D7DA9285301
0:899 0:000 BoardType: 0xA
0:899 0:000 ChassisType: 0x9
0:899 0:000 Converted CustomUUID FC9DF68A-A6BC-3E74-A24C-94DE80BC398A
0:925 0:026 === [ ScanVolumes ] =======================================
0:925 0:000 Found 13 volumes with blockIO
0:925 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1A,0x0)\USB(0x1,0x0)\USB(0x2,0x0)
0:925 0:000 USB volume
0:925 0:000 USB volume
0:925 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)
0:925 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
0:926 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
0:926 0:000 Found optical drive
0:926 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,610F388F-40E5-49D2-954A-84641CBC7F4A,0x28,0x64000)
0:926 0:000 Result of bootcode detection: bootable unknown (legacy)
0:927 0:000 This is SelfVolume !!
0:927 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)
0:927 0:000 Result of bootcode detection: bootable unknown (legacy)
0:927 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,925A9EEE-863C-4F70-AC76-94A08B528A33,0x28,0x64000)
0:928 0:000 Result of bootcode detection: bootable unknown (legacy)
0:928 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,BC6C7E25-1A9E-4A74-BF06-45FF682BFE0B,0x64028,0x1D1A94A0)
0:929 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,AED51A2D-3EBD-4EF2-9A3A-23499AF1DAA7,0x1D24D4C8,0x1D0F8B40)
0:929 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,9C652D01E6176B45A0D22E24C3FD0366)
0:929 0:000 hiding this volume
0:929 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,BAC15B56F91FDD4090861683CF4C1AF0)
0:929 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,A86D51B5A37D9845901ACCC5160BE6AB)
0:929 0:000 - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,135DDB66BCF74F41A197701B7775AB2A)
0:929 0:000 === [ InitTheme ] =========================================
0:931 0:002 Using theme 'BGM' (EFI\CLOVER\themes\BGM)
0:931 0:000 OS main and drive as badge
0:933 0:001 Loading font from ThemeDir: Success
0:933 0:000 Choosing theme BGM
0:933 0:000 after NVRAM boot-args=-v
0:933 0:000 === [ Dump SMC keys from NVRAM ] ==========================
0:933 0:000 found AppleSMC protocol
0:939 0:006 Registered 16 SMC keys
0:939 0:000 === [ ScanLoader ] ========================================
0:939 0:000 - [04]: 'EFI'
0:949 0:009 - [06]: 'EFI'
0:954 0:005 - [07]: 'Backup'
0:961 0:007 - [08]: 'Daten'
0:969 0:007 - [09]: 'Preboot', hidden
0:969 0:000 - [10]: 'MacOS'
0:991 0:022 AddLoaderEntry for Volume Name=MacOS
1:001 0:009 Check if volume Is Hibernated:
1:001 0:000 Check sleep image 'by signature':
1:018 0:017 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:018 0:000 using default sleep image name = \private\var\vm\sleepimage
1:025 0:006 sleepimage not found -> Not Found
1:025 0:000 hibernated: no - sign
1:025 0:000 [!] Icon 17 (icons\vol_internal_hfs.icns) not found (path: EFI\CLOVER\themes\BGM)
1:039 0:013 - [11]: 'Recovery'
1:043 0:004 AddLoaderEntry for Volume Name=Recovery
1:056 0:013 - [12]: 'VM'
1:061 0:005 === [ AddCustomTool ] =====================================
1:061 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi
1:061 0:000 Checking EFI partition Volume 4 for Clover
1:061 0:000 Found Clover
1:062 0:000 === [ GetEfiBootDeviceFromNvram ] =========================
1:062 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,BAC15B56F91FDD4090861683CF4C1AF0)
1:062 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,BAC15B56F91FDD4090861683CF4C1AF0)'
1:062 0:000 - LoaderPath: '<null string>'
1:062 0:000 - Guid = DCCFC2B5-F078-420C-A773-1B15BA2B484F
1:062 0:000 === [ FindStartupDiskVolume ] =============================
1:062 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,DCCFC2B5-F078-420C-A773-1B15BA2B484F,0x64028,0xEE18260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,BAC15B56F91FDD4090861683CF4C1AF0)
1:062 0:000 - searching for that partition
1:062 0:000 - found entry 0. 'Boot macOS from MacOS', Volume 'MacOS'
1:062 0:000 Boot redirected to Entry 0. 'Boot macOS from MacOS'
1:062 0:000 DefaultIndex=0 and MainMenu.EntryCount=8
1:100 0:037 SetScreenResolution: 1920x1080 - already set
1:410 0:309 GUI ready
4:551 3:141 === [ StartLoader ] =======================================
4:551 0:000 Finally: ExternalClock=24MHz BusSpeed=99769kHz CPUFreq=3093MHz PIS: hw.busfrequency=96000000Hz
4:551 0:000 Loading boot.efi status=Success
4:630 0:078 GetOSVersion: 10.13.2 (17C88)
4:630 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
4:630 0:000 Will not patch boot.efi
4:630 0:000 === [ PatchSmbios ] =======================================
4:630 0:000 insert table 9 for dev 0:0
4:630 0:000 insert table 9 for dev 0:0
4:631 0:000 Not trusting SMBIOS because SPD reports more modules...
4:631 0:000 Channels: 2
4:631 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
4:631 0:000 SMBIOS Type 17 Index = 0 => 0 0:
4:631 0:000 BANK 0 DIMM0 1600MHz 8192MB
4:631 0:000 SMBIOS Type 17 Index = 1 => 2 2:
4:631 0:000 BANK 1 DIMM0 1600MHz 4096MB
4:631 0:000 mTotalSystemMemory = 12288
4:631 0:000 NumberOfMemoryDevices = 2
4:631 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
4:631 0:000 Type20[1]->End = 0xBFFFFF, Type17[1] = 0x5000
4:631 0:000 Table 131 is present, CPUType=31
4:631 0:000 Change to: 605
4:631 0:000 === [ PatchACPI ] =========================================
4:631 0:000 Xsdt reallocation done
4:631 0:000 old FADT length=10C
4:631 0:000 SignatureFixup: 0x2A -> 0
4:631 0:000 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
4:633 0:002 Apply DsdtFixMask=0x00000000
4:633 0:000 drop _DSM mask=0xFFFF
4:633 0:000 === [ FixBiosDsdt ] =======================================
4:633 0:000 VideoCard devID=0x4128086
4:633 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
4:741 0:108 USBADR[0] = 0x140000 and PCIe = 0xFFFE
4:741 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
4:850 0:108 Found Airport Atheros at 0x1C0005, 0x0, DeviceID=0x0030
4:850 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
4:850 0:000 first CPU found at 86E0 offset 86E3
4:850 0:000 score candidate at 86DC
4:850 0:000 score inserted in acpi_cpu_score _PR_
4:850 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
4:850 0:000 Found PCIROOTUID = 0
4:850 0:000 PreCleanup XSDT: count=10, length=116
4:850 0:000 PreCleanup XSDT, corrected XSDT: count=10, length=116
4:850 0:000 === [ ACPIDropTables ] ====================================
4:850 0:000 === [ PatchAllSSDT ] ======================================
4:850 0:000 === [ ACPIPatchedAML ] ====================================
4:850 0:000 Unsorted
4:850 0:000 Inserting ssdt.aml from EFI\CLOVER\ACPI\patched: size=17357 ... Success
4:850 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
4:850 0:000 Maximum control=0x1F
4:850 0:000 Turbo control=0x21
4:850 0:000 P-States: min 0x8, max 0x21
4:850 0:000 SSDT with CPU P-States and plugin-type generated successfully
4:850 0:000 SSDT with CPU C-States generated successfully
4:850 0:000 Cleanup XSDT: count=13, length=140
4:850 0:000 corrected XSDT count=13, length=140
4:850 0:000 === [ RestSetup macOS ] ===================================
4:850 0:000 EdidDiscovered size=128
4:850 0:000 ---Discovered EDID Table size:128
4:850 0:000 000 | 00 FF FF FF FF FF FF 00 04 72
4:850 0:000 010 | 5B 03 98 00 20 33 20 17 01 03
4:850 0:000 020 | 80 35 1E 78 EE A0 A5 A6 56 52
4:850 0:000 030 | 9D 27 0F 50 54 B3 0C 00 71 4F
4:850 0:000 040 | 81 80 81 C0 81 00 95 00 B3 00
4:850 0:000 050 | D1 C0 01 01 02 3A 80 18 71 38
4:850 0:000 060 | 2D 40 58 2C 45 00 0F 28 21 00
4:850 0:000 070 | 00 1E 00 00 00 FD 00 38 4B 1F
4:850 0:000 080 | 4B 12 00 0A 20 20 20 20 20 20
4:850 0:000 090 | 00 00 00 FC 00 47 32 34 36 48
4:850 0:000 100 | 59 4C 0A 20 20 20 20 20 00 00
4:850 0:000 110 | 00 FF 00 4C 5A 35 45 45 30 30
4:850 0:000 120 | 35 32 34 31 30 0A 01 7C
4:850 0:000 --- Patched EDID size:128
4:850 0:000 000 | 00 FF FF FF FF FF FF 00 04 72
4:850 0:000 010 | 5B 03 98 00 20 33 20 17 01 03
4:850 0:000 020 | 80 35 1E 78 EE A0 A5 A6 56 52
4:850 0:000 030 | 9D 27 0F 50 54 B3 0C 00 71 4F
4:850 0:000 040 | 81 80 81 C0 81 00 95 00 B3 00
4:850 0:000 050 | D1 C0 01 01 02 3A 80 18 71 38
4:850 0:000 060 | 2D 40 58 2C 45 00 0F 28 21 00
4:850 0:000 070 | 00 1E 00 00 00 FD 00 38 4B 1F
4:850 0:000 080 | 4B 12 00 0A 20 20 20 20 20 20
4:850 0:000 090 | 00 00 00 FC 00 47 32 34 36 48
4:850 0:000 100 | 59 4C 0A 20 20 20 20 20 00 00
4:850 0:000 110 | 00 FF 00 4C 5A 35 45 45 30 30
4:850 0:000 120 | 35 32 34 31 30 0A 01 7C
4:850 0:000 Intel GFX injection not set
4:959 0:108 codec not detected
5:067 0:108 codec not detected
5:067 0:000 stringlength = 2168
5:068 0:000 CurrentMode: Width=1920 Height=1080
5:068 0:000 Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CA8A9318
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CA8A9318
5:068 0:000 Use origin smbios table type 1 guid.
5:077 0:008 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
5:077 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
5:077 0:000 Extra kext: EFI\CLOVER\kexts\10.13\Shiki.kext
5:078 0:000 Extra kext: EFI\CLOVER\kexts\10.13\Lilu.kext
5:081 0:002 Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID_Intel_HDMI_Audio.kext
5:081 0:000 Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID.kext
5:084 0:002 Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID_XHCIMux.kext
5:086 0:002 Extra kext: EFI\CLOVER\kexts\10.13\IntelGraphicsDVMTFixup.kext
5:087 0:001 Extra kext: EFI\CLOVER\kexts\10.13\CoreDisplayFixup.kext
5:089 0:001 Extra kext: EFI\CLOVER\kexts\10.13\IntelGraphicsFixup.kext
5:091 0:001 Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID_Intel_HD_Graphics.kext
5:092 0:001 Extra kext: EFI\CLOVER\kexts\10.13\RealtekRTL81xx.kext
5:097 0:005 Extra kext: EFI\CLOVER\kexts\10.13\FakeSMC.kext
5:102 0:004 SetStartupDiskVolume:
5:102 0:000 * Volume: 'MacOS'
5:102 0:000 * LoaderPath: '<null string>'
5:102 0:000 * DevPath: MacOS
5:102 0:000 * GUID = DCCFC2B5-F078-420C-A773-1B15BA2B484F
5:102 0:000 * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>DCCFC2B5-F078-420C-A773-1B15BA2B484F</string></dict></dict></dict></array>
5:102 0:000 Custom boot screen not used because entry has unset use graphics -
bei dir läuft was falsch, dein config smbios ist imac 18,2
-
Ne es ist 14.2 habe nur die 18.2 kurz probiert um zu gucken ob sich etwas ändert.
