Yes i have . I Try now New Installation maybe i did something wrong.
If this fails again i will surrender ♂️
Hackintosh Installation
-
- Erledigt
- protex1986
- Erledigt
-
if it fails try installing on a regular hard drive
i had an intel m.2 and was having issues on my msi mobo
-
Got it now. But with Multibeast Bootloader. I think im to Dumb for Clover
Now just have to Fix Videokexts. Everything other works fine . Tryd to download the Nvidia Driver for my 1070. But i get every time a warning that installation failed.
-
this is if you boot with clover
boot with inject EDID And inject nvidia webdrivers then boot and install web drivers.
just tested this method and it working just boot again with inject EDID And inject nvidia webdriversonce you install web driver if you need display audio here are some kext they go in library and extensions then use kext utility
if you dont need displayport audio remove applALC
here is my drivers64UEFI folder i use
Vooddoohda will give you hdmi audiogood luck
-
Bricked? Boot in verbose Mose to see what error you get , you weren’t able to install web drivers? That was the first step
-
Was habt ihr denn gemacht?
Das sieht ja furchtbar aus... und dabei meine ich nicht die Meldung, sondern die Bildqualität...
Wie ist denn der aktuelle Stand deiner EFI?
Was hast du alles im BIOS gesetzt? -
Das ist eigentlich nicht korrekt...
Du kannst auch mit installiertem WebDriver in den Safe Mode (-x) booten, wobei der WebDriver dann eben nicht aktiv ist und in die Suppe spuckt.Wie hast du im BIOS deine IGPU eingestellt?
Poste doch bitte mal deine aktuelle EFI... -
Ich installiere grad neu
mit -x hat er sich aufgehangen nichts ging.
Igpu im bios ? Ich habe alle Einstellungen so eingestellt wie mir empfohlen wurde .
Mich besitze das MSI z170 Tomahawk , kann Mann da überhaupt was an der GPU umstellen ? -
Laut der Seite 47 deiner Anleitung: ja...
-
ill try my best to help you but can you think of anything that lead to that problem?
also have you updated to the latest bios?
the 64 folder is the one i use and currently worknig for me, i didnt have to mess with my graphic settings in biosalso i had a m.2 that was giving me problems. if you can boot with usb installer and install it might be your m.2.
i was able to install in intel m.2 then after a few boots i would get error. i install in regualr hard drive so far its good.
check your bios settings again
-
Es ist im Gegenteil zu früher sogar einfacher geworden... ggf. hängen dir aber die alten Herangehensweisen noch im Kopf...
-
are you installing mac os or installing web drivers ??
my method didnt work for you ?? have you updated to the latest clover?
so what's the version of mac os you using?
did you try a different hard driveyou might want to try smbios 14.2 as well.
in the lastest version of mac osi have msi z270 board
i7 7700k
gtx 1080tisimilar specs
i attached my kext i use for clover and drivers64UEFI
these are my bios settings
so enable xhci usb handoff
-
Okay good to hear
