macOS Sierra upgrade macOS High Sierra

Before you upgrade, make sure the following components are up-to-date:

- Clover Bootloader
- All the Kexts you hopefully use from /EFI/CLOVER/kexts/Other
- The BIOS-related Values with in the SMBIOS-Section in your config.plist. (save your current Serial Number and Board Serial Number somewhere else, before changing the other values)
- The old KextToPatch-Entry to raise the number of usable USB-Ports should be change to:

Kexts always depends on the hardware of your Board, with the exception of FakeSMC.kext, which is needed on every Hackintosh system.

What to choose?
If you update from an older Clover version you should see the following Options within the "Customize"-section:

For new installations I'd prefer to only use "AptioMemoryFix" instead of the combination "OsxAptioFix2Drv-64" and "EmuVariableUefi-64":

This seems to be messed up.
There is way to much stuff installed...
You can delete the whole /EFI/CLOVER/drivers64 directory, since your system will not use its contents.

Also the directory /EFI/CLOVER/drivers64UEFI has to much files inside.
If you use the config shown in my screenshots above, check the contents in that folder again after the upgrade and post a picture.

If you're using Clover on the hidden EFI-Partition and your bOard ist seht to boot from UEFI-based hard drives, this folder is not necessary...

Have you found a solution meanwhile or do you still need help?

Which layout ID did you inject?
It should work with the number "1".

This response is not helpful....
Dis you try the number1?
What is the result?

The AppleALC.kext and the Lilu.kext are available in the /EFI/CLOVER/kexts/Other-Folder?
Both are the newest version?
Please post your config.plist as a file attachment.
This works with "Advanced Reply"->"File attachment"...