asus gl553vd
-
- Erledigt
- mt-fr
- Erledigt
-
Your codec dump shows only 3 connections!
Internal speakers, HP and internal mic
Try this:
trial1 with LayoutID 16
trial1_ALC235_ASUS_GL553VD_layoutID16.zip
output:
internal speakers in SwitchMode with HP (if HP is plugged, then the display changes in HP at the outputs)
input:
internal mic (currently configured with Boost 1)
Note:
this is the first computer (CodecDump), where EAPD2 is also set on the mic. This is absolutely new.
Your SSDT-HDEF.aml:
"Layout-id"
Buffer (0x04)
{
0x03, 0x00, 0x00, 0x00
},
(hex)...
LayoutID 3 is 03
LayoutID 11 is 0B
LayoutID 14 is 0E
LayoutID 15 is 0F
trial1 with LayoutID 16 is 10 (0x10, 0x00, 0x00, 0x00)
LayoutID 28 is 1C
-
I do not understand. The name of the microphone does not change either.
In your ioreg, layout-id is 02 00 00 00 and alc-layout-id is 10 00 00 00.
Delete the bootflag alcid=16 in the Clover! Try this!
See under System Settings / Sound
outputs:
internal speaker (works yes / no?)
(if headphones are plugged in then the display changes from internal speaker to headphones)
Headphones (works yes / no?)
inputs:
internal mic (works yes / no?)
-
I removed bootflag and use inject 16 and
PciRoot(0x0)/Pci(0x1f,0x3) = layout-id 10000000 in properties ,
but I haven't sounds and microphone ! MacPeet
internal speaker no ( doesn't in system list )
Hedephone no ( doesn't in system list )
Microphone no ( doesn't in system list )
MR MacPeet , MR anonymous_writer made kext for manage all of PCI device can you editing it and add audio id .(
SunrisePointHInjector.kext pluglns in it for pci device ) ( i'm using v of it with out layout-id and alc-layout-id , because it replace id of clover config)
-
my codec layoutID 16 works so? Complete?
layoutID 15 has different entries for speakers and headphones, which rather disturb.
If 15 works, then it's good. ID 15 is already in release.
Do I still have to make changes to the ID 16 or is the 15 ok for you?
-
-
You write Speaker and internal mic work. Headphones too (in switch mode with the speakers)?
try this for external mic:
trial3_ALC235_ASUS_GL553VD_layoutID16.zip
Lilu remains unchanged from trial2 !!!
If it does not work, I have more ideas ...
-
Ok, so you can confirm that with ID16:
internal speaker works,
Headphones works,
internal microfon works
external microphone (LineIn) works ???
Then I pass on the new codec to the release!
-
I'm using your V1 Clover on github and patched some new kexts to SLE & LE, is it compability if i patched your new V5-HDMI?
-
I'm using your V1 Clover on github and patched some new kexts to SLE & LE, is it compability if i patched your new V5-HDMI?
Hi.
v5-hdmi for using hdmi !! when do you install it cpu power using up to 5 W !!!
different between the main and hdmi v is dgpu patch and one kext .
-
The new codec should be in the next release, I hope.
-
I bought and setup new wifi card BCM4350ZAE today and have realized that only wifi is working without bluetooth, so i followed this easy patch, it's working nice with my airdrop. Hope mt-fr will add this to your next patch
-
Does anyone has solution with full featured fn-keys?
-
The new codec should be in the next release, I hope.
MacPeet anonymous_writer Noir0SX al6042
HI .after one years i come bak for more fixing mac os on gl553vd . I need your help .
can you mix two id setting in applealc ?
id 15 microphone work very good. I test it . ( internal mic and headphone mic )id 22 speaker work very good ( headphone and internal speakers)
mix id 15 and 22 for update id 16 .
{
Layout 22 ALC235 for Asus ROG GL553VD-FY380 (#448)
add some Chinese translate,and support FX53VD ALC235 with ID : 15 (#362)
}
and last day when i open the laptop I tooke this photo:
