Catalina 10.15.4 ready for Gigabyte Z97M-D3H
i have tried you file, but it didn't work on my device, mostly the GPU. z97m-d3f, e3 1231 v3, r9 370x. the screen went black with signal, could you help me with this problem?
Ozmosis mit macOS Catalina 10.15 – OZ167X-XMAX (extended)
-
- Umsetzung prüfen
- kuckkuck
- Erledigt
-
-
Do you have a old KernextPatcher Plist on your EFI Partition?
-
Do you have a old KernextPatcher Plist on your EFI Partition?
i clear up all the file in efi partition, the screen still go black with signal, i don't know what went wrong, should it be GPU? i have r9 370x
-
Do you have Whatevergreen.kext and Lilu.kext in EFI/OZ/Darwin/Extensions/Common?
-
Do you have Whatevergreen.kext and Lilu.kext in EFI/OZ/Darwin/Extensions/Common?
Yes, l have downloaded the both of the latest files
. But it still didn’t work
-
I also don't know what you can Do Now? kuckkuck could know what to Do.
But first Check your Bios settings.
IO disabled.
CSM disabled
XHCI enable.
-
Edit by al6042 -> Please do not quote posts, which are located directly before your post...
cpu: e3 1231 v3
mainboard: z97m-d3h rev 1.2
gpu: dataland r9 370x
i dont't have igpu, and i have set bios as @theCurseOfHackintosh said
-
Edit by al6042 -> Please do not quote posts, which are located directly before your post...
the installation is all right, but when i try to start the system after installation, it start with the apple logo, then go black with signal. i tried the dp port and hdmi port and got the same result
-
-
-
it start with the apple logo
Is there a progress bar? Please describe the issue more thoroughly. Also boot in Verbose Mode and attach a picture of the issue if an error message is being displayed.
-
-
Please mode my BIOS.
-
OK. I´ll look what I can do
Edit: dmitryum
OZMOSIS Rom for macOS Catalina 10.15.5 and newer: H81T-R2-SI-0503-XMAX.zip
-
Security verification filed!
-
You have to flash with USB Bios Flashback
Or FPT if your motherboard doesnt support flashback.
-
My motherboard doesnt support flashback
-
So you need FPT. (or just use OpenCore).
For FPT you need the OZ BIOS as ".ROM".
Here the Files, it can flash in Windows or DOS.
