Mo-5590 what's your internal wlan modul? if you use intel model, you can use this kext https://github.com/OpenIntelWi…wm_v2.2.0_stable.kext.zip and use it with heliport too https://github.com/OpenIntelWireless/HeliPort
OC DELL Latitude E6420
- Mo-5590
- Erledigt
-
-
my intel modul work with Sonoma without problems
-
got latest ventura 13.4.1 to work with oclp acceleration and latest clover. Now I'm trying to fix broadcom bcm43225 wifi
-
-
Hi,
I'm trying to use my e6420 (i5, HD3000, 8GB, SSD) as High Sierra hackintosh.
I tried with latest opencore, but USB ports don't work and i can't boot with SMBIOS set to macbookpro8,1.
I tried with latest Clover and USB and other things work, but laptop goes to sleep after boot.Can You share Your latest OC folder, one that works with HS? Or You think Clover is better?
Best regards,
Goran
-
got latest ventura 13.4.1 to work with oclp acceleration and latest clover. Now I'm trying to fix broadcom bcm43225 wifi
hope dies last
finally a user who turns on the graphics acceleration
wonderful
-
Hi gorans,You should use macbook pro 15,2
And for USB problems
You should use these tools from the masters of OpenCore or Hackintool to generate ssdt or kexts with your own map
Hi,
thanks for the input.
It wasn't a problem with USB, rather with SSDTs. I made new SSDT tables with SSDTTime and copied SSDT-PNLF and IMEI SSDT from pre-made e6420 efi. Fiddled a little with the sound but now have a working USB, sound...
I have a problem with CPU PM. I created SSDT-PM with ssdtPRGen (instructions) but when I disable Drop CpuPm and Drop Cpu0Ist from ACPI/Delete and use created ssdt-pm, processor stays at 0.8GHz. If I don't use SSDT-PM.aml and enable these two in ACPI/Delete, PM is working but cpu doesn't go over 3GHz where it should go to 3.2GHz.
When I sort this out, card reader is next.
Thanks,
Goran
-
I recreated SSDT-PM. Script properly detected proc and built SSDT, but If I try to use it, processor stays at 800MHz, so I reenabled Delete Cpu0Ist and Delete CpuPm. One core is listed as 3.2 and other as 3.0 turbo and Intel power gadget shows 3.0 max and proper scaling. I'll settle with that.
Per Your advice, I used Clover to create SSDTs, but it created 21 file, including couple of DSDTs. I don't know what I need from all that, and with proper SSDTs and Open Core You shouldn't need DSDT at all, so I left in OC SSDTs (SSDT-EC.aml, SSDT-IMEI.aml, SSDT-PNLF.aml, SSDT-HPET.aml and SSDT-PLUG.aml)
I went with MacBookPro11,5 SMBIOS as newer models had some beachballing here and there (on authenticate dialogs for example).
Latitude e6420, i5-2520M,8GB RAM, SSD, OC 0.9.4, 10.13.6 High Sierra
Working:
IGPU with fully supported VDA decoder
USB
Sound (Speakers, headphones, HDMI)
HDMI
Wifi (Aetheros, slow, around 3-4 Mbps)
Ethernet
Bluetooth (oddly can't turn off, sometimes flakey)
Trackpad/Pointing stick
Function keys (volume, brightness, media...)
Sleep/wake
Not working:
SD Card reader
I'm attaching the EFI. Remember to change Serials if somebody decide to use this.
Best regards,
Goran
-
Thank You Mo-6420.
I tried attached kext, didn't work.
Then I tried Generic Card Reader Driver Friend! Also didn't work.
I followed the guide and inserted what I think is correct:
Still nothing. I also tried with 33313 as idProduct but to no avail.
Guide says that reader should be visible under USB, but it's not, so I think we're missing some steps here.
As I said, it's not a big deal for me but if we can do better, why not.
Best regards,
Goran
-
-
Hi Gorans and Hécatomb too,
For me
100% working
I know now the kext in Sonoma ... I'll send it
Good luck
And thank you very much
-
Here a link to the Sonoma Wi-Fi kext… there are already some new versions
