Yepp, once i saw this, I thought there must be a way that this can work. But never found one until today 
Bild & USB Hub über USB-C Port der Grafikkarte?
- Arstidir
- Erledigt
-
-
Yepp, once i saw this, I thought there must be a way that this can work. But never found one until today
try this with monterey and send ioreg
-
With this one no new controller is showing up in hackintool and no usb connection.
-
With this one no new controller is showing up in hackintool and no usb connection.
try
-
With this one the controller and the drives show up.
I will give an update about the speeds in a bit.
-
With this one the controller and the drives show up.
I will give an update about the speeds in a bit.
send log ioreg please
-
it's still slow as before. A disk benchmark (DiskMark) takes very long and i actually never completed one.
-
it's still slow as before. A disk benchmark (DiskMark) takes very long and i actually never completed one.
Do you use connected hub? You are taking advantage of the hs wuindi usb 2.0 part and slower for this reason. Connect usb 3.0 device to type c and then do speed test
-
The hub is build into the monitor.
When I use a USB 3.0 adpater (dont know if this small adapter is actually any good) to usb-c directly into the GPU it shows up quicker at the desktop and i got this speed.
directly to USB 3.0
USB-C from mainboard to Monitor I get this.
With adapter to mainboard usb-c:
Yepp, looks like the adapter is not really good.
edit: I have tested now also with a thunderbolt cable, which doesn't change anything.
-
A SSD connected to 6900Xt USB typeC
-
-
Hi, I do not use Monitor Usb because it is a 43 '' and USB are in the back part not easy to reach
this result is with a meter cable from GPU to my USB case
-
Alles anzeigenhttps://github.com/koush/Kexts
thanks Lorys89 to show me this key and Aluveitie to have linked me this repo
with this kext I have my USB type C on 6900 xt working perfectly
Thanks for this one! I also have a 6900XT with which I like to use my Drawing Monitor over USB-C.
So far only Display worked, the pen did not get recognized my macOS so far.I guess this will solve this issue.
How did you install this kext? Simply with adding it to Open Cores Kext Folder and load it with the config.plist?
Thats all? If there are more settings necessary, would you mind sharing the info?
Update: I did a qucik try, which does not work so far.
I tried both IDs in the kext, 073a6 and 073a4.
USB Devices are not getting recognized on the USB-C Port of my 6900xt. -
How did you install this kext? Simply with adding it to Open Cores Kext Folder and load it with the config.plist?
i did in this way only
-
i did in this way only
I have no USB devices in my Device tree.
Maybe I have to remap my USBPorts.kext with the USB-Map Tool from Windows?
