Ozmosis migration to Opencore

ok, the ethernet nic is working, so far so good, that is more as before,

is the wlanicon displayed or have you activated it in the settings?

at this moment it is your turn, you have to test which alcid ist the right one ,

lecture :

• https://dortania.github.io/Ope…ridge.html#starting-point
• https://dortania.github.io/Ope…ist/ivy-bridge.html#nvram
• https://github.com/acidanthera…alc/wiki/supported-codecs
• https://dortania.github.io/Ope…#broken-imessage-and-siri
• tools: instead of propertree you can use this, free and for different plattforms availble - https://github.com/ic005k/PlistEDPlus/releases

greets

Can I use that bios mod on my Z77-D3H rev.1.1?

Revision 1.0 and 1.1 bios are the same you can try but the best way is to take the modules from apfel-baum firmware and insert them into revision 1.1 firmware I made you a bios mod from apfel-baum mod modules(I am not responsible for a broken motherboard)

Zitat von pupokass

Revision 1.0 and 1.1 bios are the same you can try but the best way is to take the modules from apfel-baum firmware and insert them into revision 1.1 firmware I made you a bios mod from apfel-baum mod modules(I am not responsible for a broken motherboard)

Thank you so much! This fixed bootup issues. I always had to disable all the boot entries to be able boot and it had made every time new ones.