Okay habe den Cardreader raus gezogen und f12 gedrückt bin jetzt hier :
Edit: da hätte ja dann eigentlich die 980 pro sein müssen zur Auswahl oder ?
Um schreiben oder kommentieren zu können, benötigst du ein Benutzerkonto.
Du hast schon ein Benutzerkonto? Melde dich hier hier an.
Jetzt anmeldenHier kannst du ein neues Benutzerkonto erstellen.
Neues Benutzerkonto erstellenOkay habe den Cardreader raus gezogen und f12 gedrückt bin jetzt hier :
Edit: da hätte ja dann eigentlich die 980 pro sein müssen zur Auswahl oder ?
hast du csm im bios ausgestellt? - stelle das mal wieder an -speichern- und starte ohne den reader neu.
lg
- ja das wäre der plan, eigentlich
Ja habe das gemacht jetzt werden mir 2 Sachen angezeigt:
ok, das sieht doch schonmal gut aus , wähle die samsung und drücke enter
lg
Jetzt kommt das 😕
Edit: und das reboot and select usw ist dazu gekommen.
das sollte ansich nicht kommen, betrifft alles deine netzwerkkarte,-aber gut-
dann eben nochmal die prozedur mit der win installation, also die von sdkarte auswählen, im setup wieder die partitionen löschen und dann weiter- wenn schwarz wird und der reboot kommt, den usb-cardreader raus..
mal gucken
lg
Okay und nach dem Neustart und rausziehen, f12 drücken ?
ja, genau - dort dann die ssd auswählen
lg
Okay mach ich
Damit das von diesem Samsung 980 Eintrag booten würde, müsste auch Windows im legacy Mode drauf installiert sein.
Wsd ist das aktuelle Problem? Csm sollte bei so neuer Hardware (und eigentlich immer wenn möglich) Disabled sein.
Okay bin jetzt wieder hier
Edit:
thecurseofhack: bist du dir sicher das es im Legacy Mode installiert sein muss ?
weil ich weiß nicht welches Windows mein Kollege drauf geladen hat, könnte das sonst schnell vorbeireiten und dann mit dem Legacy Mode nochmal versuchen
Für csm enabled und diese Option müsste es legacy sein.
Legacy sollte man aber nicht nutzen, das bringt meistens nur Nachteile (langsamer, schlechte boot Auflösung, Treiber auch ohne legacy leichter normal), immer wenn möglich csm Disabled und uefi nutzen.
Okay also was soll ich jetzt machen ?
Bin nach dem Neustart wieder auf die ssd gegangen aber das hier kam wieder, denke nicht, dass das klappt 😕
nicht vergessen- es geht grade um eine "nur windows" installation, noch kein osx, richtig? Refluxgreen
Also Windows 10 pro ist das, was bedeutet denn osx
osx oder das apple betriebssystem für den ansich mac,
Ja also Windows 10 pro ist das, was auch auf dem cardreader drauf ist
es ist eben wichtig zu wissen wie die ausgangsituation ist- und wohin es gehen soll-
es kann auch gut daran liegen, das du das via der sdkarte versuchst zu installieren, und oder mitunter am der firmware, sowohl deines rechners, da sind mittlerweile 2 neuere erschienen, und die der ssd
lg
Ja dann schätze ich lass ich es wohl sein jetzt…
mich danke dir trotzdem für deine Mühe mir helfen zu wollen sehr lieb 👍🏻🙂
naja, wenn man das ganze via ferndiagnose macht ist das eben etwas anderes, als selbst davor zu sitzen , ich würde noch nicht aufgeben, ansonsten ggf. die sdkarte durch einen tatsächlichen usb stick tauschen, und ggf. auch anstatt der samsung eine wd ssd nehmen, und oder den wininstaller eben z.b. direkt mit dem mediacreationtool von ms auf einem usb-stick erstellen
--
sprich, es kann auch sein, das die sdkarte nen ditscher hat/ defekt ist
lg