Hallo ich hatte vor ein Hackintosh mit den im Titel genannten Teilen auf MacOS Monterey zu installieren. Nun startet er nicht. Vielleicht weiß ja jemand was ich machen kann. BIOS Einstellung sind richtig, mein EFI und die letzte log Datei sind im Anhang.
Ryzentosh - Ryzen 5 3600 - ASUS PRIME B450M-K II - AMD 6600 XT (Er Startet nicht)
- Ninjiopl
- Erledigt
-
-
-
Ninjiopl a phot where your system hangs?
I would try with this config (it is yours with some kexts disabled)
-
Ninjiopl a phot where your system hangs?
I would try with this config (it is yours with some kexts disabled)
So i tried your config but it has the same problem. I noticed that always a few lines before it hangs the AMDCPUSupport are mentioned. My log file can be found in the attachment. (Sorry for my English its really not the best.)
-
have you tried to disconnect ethernet cable?
Debug is not useful it is written before your hang
Check also your BIOS settings:
4G ON
UEFI ON
CSM OFF
-
Ok my Bios Settings are all right, I disconnected my Ethernetcable and it hangs with this result.
-
-
Ok I tried this EFI with Ethernet and without, the first Foto shows how it hangs with Ethernet and the second without.
-
try this, if it doesn't work add only SSDT-EC in ACPI folder and declare in config.plist (take it from old EFI)
If no one helps you meanwhile, tomorrow I will try to understand why it is not working
-
Thanks for all this!
-
-
-
Doch ist in dieser EFI drin musst du nur raus Kopieren https://www.hackintosh-forum.de/attachment/201324-efi-zip/
Ist Post # 7
-
Hab ich auch aber ändert nichts daran, dass es nicht läuft
-
Hab ich auch aber ändert nichts daran, dass es nicht läuft
if you have not solved could you try this EFI?
Post photo where it hangs (if it hangs)
-
Only a tip, you should take out the serial number on the config.plist, because you can get information out of it and i anyway generate a new serial number
-
Only a tip, you should take out the serial number on the config.plist, because you can get information out of it and i anyway generate a new serial number
it is second time here people said this to me.....usually I put different and fresh data if I propose an entire EFI which they aren't mine but freshly created!
however thank you for the prudence
-
ok now it just doesnt show anymore in the bootloader
-
what do you mean? no boot menu?
have you create the right tree in your EFI partition?
-
there is a boot menu, but only the option for my windows