Beiträge von juantrix

has Rx6xxx support?

I do not use XhciPortLimit because I mapped my usbport in a kext.
my solution: installing UsbInjectall & removing my usbport.kext.

Latest 11.3 beta 2 broke usb port, so no keyb & mouse.
I do not use XhciPortLimit in OC, used USBPorts.kext that worked correctly previously.

There is a ticket for it acidanthera issues USB 11.3b2.
How can I go back / unenroll from beta without reinstall all the system?

You can path your bios for 0xE2 MSR as well as the 0x1AA MSR.

Use UEFIPatch with attached patches.txt (see code included).

In a Opencore created as a Skylake-X spec use:

EnableWriteUnprotector quirk instead of RebuildAppleMemoryMap+SyncRuntimePermissions.

npci=0x2000.

Did you extract your original ACPI? (Check your CPU plug)... some boards identify CPUs differently as required for Mac.

try metacollin SSDT-CPU-WRAP

Hi, can you help me adapting IOReg Path?

PCI0.RP21.PXSX.PCI-Bridge.NHI

dschaek, you need to ajust your USBMap.

You need to use same version... VirtualSMC-1.1.9-LANZAMIENTO

Some users appears with the same problem (disconnected).

Did you play with windows? (check it work with drivers installed, then shutdown, power Off completly). Try boot OSx.

Frohe Weihnachten Euch allen !

bleibt gesund

Thunderbolt

I have a gigabyte GC-Titan Ridge Card.... there are a lots of information in this forum thanks to DSM2 about flash it with a programmer, jumpers pins to force power... needed to appear in system info - hardware - Thunderbolt.

If you have a no flashed card (modified firmware), you can obtain hotplug only with a correct aml for your card.

Asus ThunderboltEX (Alpine ridge) (need to be configured in bios and connect to mobo).

more info:

ASUS-THUNDERBOLT-EX-3

REMOVED by DSM2 - Tonystuff links are not welcome here...

Thunderbolt SSDT with Custom DROM

Personalized SSDT

AQC107

If you have problems with AQC107... Remember to update the firmware...

A long time ago, used Aquantia Diag Tool Software to update the initial 1.50 firmware from windows.
AQC firmware

I used SSDT-X299-AQC107.aml in Clover...
In Opencore, properties can be added directly in config.plist

Patch it necesary.(kernel - Patch)

For me, there is no differences in smbios used. But remember, for x299 is recommended iMacPro.
I have a TitanRidge AIC with v33 firmware flashed & personalized aml. No issues at the moment.

I forgot to enable SmallTreeIntel8259x.kext in config for Intel X550T2.
My Radeon VII´s is DownPower with Custompowerplay to 981mV & HBM 1100MHz in aml.

@Ghostmac1969,

I´m moving to a Sage/10G Mobo. Try my OC modified for it.
(OC063 Sage10G 7960x 2xVII TH wifi 3203Bios)

I´m working in a correct implement of USB yet.

OC 061 R6E 7960x VII´s TH MP7,1 10.15.7 & Big Sur 11.0.1

Warbands

CLOVER EFI & BIOS & SETTINGS

wellcome @Warbands

I´m using your same motherboard & GPU. I will update my config to 062 and compare.

Was ist besser als eine Thunderbolt Karte?

3x Debugging

I have 2 THB3 AIC with patched firmware NVM23 (Pin3-5 Jumper) No USB2 No power required.

Installed in Slot 3 (PCIex4) (PCIO-RP21_PXSX)
Installed in Slot 4 (PCIex16) (PC01-BR1A_PEGP)

Hot/Cold Plug work correctly (eGPU_Radeon VII /extract icon & Sonnet 10GBe /IP Re-Asing)

Work dual port in both

Patched NVM23 & proper ThunderboltConfig

Zitat von CMMChris

Gracias También funciona con el Radeon VII: D

[Adjuntar = '128721', 'ninguno', 'verdadero'] [/ attach]

How did you it?

Working in Hotplug...