ok now I removed my external gpu and only use intel gpu but still my vanilla USB hanged at middle of loading and I see its hanged at "considerrebuildofPrelinkedKernel org.netkas.driver.fakesmc triggered rebuild"
Beiträge von arminmacx
-
-
Ok thanks for al6042 help I just get into bios because after flashing it use intel gpu. I change my bios setting and use my pcie gpu but now my USB load but at the end is goes black screen and nothing happens .
btw al6047 I can't reply to that thread anymore because there isn't any reply button over there for me anymore
-
Alles anzeigenI think I know what's your issue here...
WIth the flashing of the Ozmosis flavored BIOS the IGPU/IGFX is activated and set as "Initial Display Output".
In that case you have only two options:
1.
use ESC-key while starting the box until the complete screen turns red, than use the DEL-key to get into your BIOS.
2.
If that doesn't work, remove the GT 640 and connect your monitor to the onboard graphics outlet, then use the DEL-key to get into your BIOS.If you've reached the BIOS, use the following settings:
Initial Display Output : IGFX or the Slot which should contain the GT 640, which should be "PCIe 1 Slot"
If you also want the internal Graphics (HD4600) to work, you should set:
Intel Processor Graphics : Enabled
Intel Processor Graphics Memory: 32M
DVMT Total Memory Size : MAXOk I give it a try now and report few min later
-
-
Oh I didn't know that. I know this is not a place to ask this question But can you explain me why after flashing my bios i cant boot any vanilla osx usb or why i can't access my bios settings i just can access my drive list using F12 and each time i hit my usb drive it just BEEP and hang and i had to restart my pc
If you have time to see and help me I opened new thread in here Need Help for Ozmosis Z97X-UD3H-BK rev1.2 F8 about what i did to create my bios and what happened when i used created one or mine
-
[Quote = 'derHackfan', 'https: //www.hackintosh-forum.de/index.php/Thread/24785-OZMOSIS-REQUEST-THREAD-Ozmosis-Request-Thema/? PostID = 319564 # post319564'] You look Here / take a look at this: Here again with NVIDIA friendly system definition (iMAC 14,1) [/ quote]
Hi I downloaded it and its not rev1.2 or i think so.i install it and i cant access bios settings and i cant boot my vanilla usb installer
-
Hi,
Please kindly make bios for this mobo & if possible with iMac 14.2 SMbios:
1. Manufacturer: Gigabyte
2. Model: Z97X-UD3H-BK Rev 1.2
3. Chipset: Z97
4. Bios Version: F8
5. Bios Link: http://download.gigabyte.asia/…os_ga-z97x-ud3h-bk_f8.zip -
Hi everyone,
First of all please accept my apology because i can't write in german.
I have a problem with creating ozmosis bios for my mobo, I did exactly guided in this forum and few youtube videos but each time i get an error which tells my bios going explode. and my bios has 1.4 MB of free space but still getting that error.
at this rate i delete most of unused ffs or at least most of the guides tells but keeps needed files. finally i create one BUT when i flash my mobo with the new one when i hitting F12 to get to disk selection menu and choose vanilla usb installer my pc just BEEP and some times stuck at gigabyte logo or stuck in black screen . I can't even access bios to change my settings.
I have my own DSDT.aml which it makes USB3 works with helps of FakePCIID.kext & FakePCIIDXHCIMux.kext and i injected it to my bios too. i attache my DSTD so you can see it
I compressed all of my kext to ffs so i can get enough space.
I used OZMTools v0.3 and OZM package for sierra from this site.
Please help me
