Beiträge von Nanimos

Nanimos · 13. Januar 2017

http://ddi.hopto.org:3000/henr…CloverInstall/wiki/Sierra

Das sollte den Vorgang erklären. Installiere es als UEFI und mach Secure Boot aus. Das geht zu 100% !!!

Nanimos · 11. Januar 2017

In Applications muss die Install App liegen nach dem Download.

Nanimos · 11. Januar 2017

Du musst den USB Stick als erstes Boot Volumen setzten dann das Laufwerk und die Festplatte und dann den Windows Boot Manager.

Wenn das nicht geht hast vergessen ein Passwort zu setzten sonst erkennt der auch den Stick nicht. UEFI muss das jedenfalls angehakt sein.

Secure Boot auf Disable stellen.

Nanimos · 11. Januar 2017

Legacy ist falsch das muss auf UEFI stehen!

Du brauchst ebenso die AHCIPortInjector.kext wenn du keine gepatchte DSDT nutzt und ApplePS2SmartTouch.kext letzte ist die v4.7 beta 5 sowie RealtekRTL811.kext für LAN

Nanimos · 11. Januar 2017

Du musst beim Acer ein Supervisor Password im Bios setzen! Ohne geht es bei Acer nicht.

Nanimos · 8. Januar 2017

@megabyte0469 wie hast du dein System Installiert? Also ein Clean Install ist das wohl nicht? Sonst kann ich mir nicht erklären wieso er immer Layout ID 1 injected auch wenn du Sie änderst. Ist zwar ein OZ Bios aber ich denke mal das irgend ein HDAEnabler oder sowas mit Installiert worden ist.

Nanimos · 8. Januar 2017

@Fredde2209 Er Fragte ist hier was Falsch, deshalb hab ich das so erklärt. Das es nicht ohne geht ist mir klar. Also entspannen bitte

@megabyte0469 versuche mal andere Layout ID's

Nanimos · 8. Januar 2017

Bei der OOB_DSDT.aml wird nix Injected. Also keine Layout ID

Bei der DSDT.aml wird Layout ID 1 Injected.

Du kannst mal alle durchtesten von 1,2,3,5,7,92,99

Such nach HDEF mit MacIasl und ändere die einfach.

Bsp. 0x01, 0x00, 0x00, 0x00 das wäre Layout ID 1willst du 2 testen 0x02, 0x00, 0x00, 0x00 usw.

Nanimos · 5. Januar 2017

So auf dem ersten Blick sollte die Out of Box gehen mit der ID. Die wird jedenfalls erkannt. Oder hast du mit einem DSDT Patch die ID gefakt und Original eine andere? Die sollte eigentlich Laufen . Was hast du in deiner config.plist stehen für diese Karte bei Kext to Patch in Clover? Schon mal mit Kext Utility die System Cache neu gemacht?

Was geht eigentlich nicht kein WIFI oder was anderes?

Nanimos · 5. Januar 2017

Zitat von digifreak

Hat dazu jemand eine Idee?

Poste dein ioreg mal dann kann man weitersehen.

@al6042

Ja wie gesagt ist es komisch, normal kann da das nicht gehen wenn die Bord ID von der DeviceID abhängig sein soll. Na auch egal wenn es dann geht.

Nanimos · 4. Januar 2017

Sehr komisch. So wie das aussieht Fakes du die 43b1 mit 43a0 nur, damit der Dsdt Patch mit die Karte geht. Ich glaub der Whitlist Patch macht nix weiter ? Kann mich auch irren.

For Wi-Fi modules with DeviceID=0x4353 (series Broadcom BCM943224xx), whitelist contains:
Mac-66F35F19FE2A0D05 - MacBookAir5,1 -(11-inch Mid 2012)
Mac-2E6FAB96566FE58C - MacBookAir5,2 - (13-inch Mid 2012)

For Wi-Fi modules with DeviceID=0x4331 (series Broadcom BCM94331xx), whitelist contains:
Mac-00BE6ED71E35EB86 - iMac13,1 - (21.5-inch Late 2012)
Mac-7DF2A3B5E5D671ED - iMac13,3
Mac-FC02E91DDD3FA6A4 - iMac13,2 - (27-inch Late 2012)
Mac-ACE8A17C0DE83137
Mac-031AEE4D24BFF0B1 - Macmini6,1 - (Late 2012)
Mac-F65AE981FFA204ED - Macmini6,2 - (Late 2012)
Mac-C6EFA63962FC6EA0
Mac-AFD8A9D944EA4843 - MacBookPro10,2 - (Retina, 2012)
Mac-C3EC7CD22292981F - MacBookPro10,1 - (Retina, 2012)
Mac-6F01561E16C75D06 - MacBookPro9,2 - (Mid 2012)
Mac-4B7AC7E43945597E - MacBookPro9,1 - (Mid 2012)

For all Wi-Fi modules with any other DeviceID, whitelist is not applicable.

Quelle: Insanelymac

Nanimos · 4. Januar 2017

Moin!

@al6042 zwecks dem Whitelist - Patch.

Soweit mir bekannt ist muss die WIFI CARD mit ID 0x4331 (BCM94331xx) oder 0x4353 (BCM943224xx) Injecten damit du den Whitlist Patch nutzen kannst. Mit anderen ID's geht der Patch nicht.

Nanimos · 11. Dezember 2016

hi! Ich will in das Advance Bios Menu von meinem Notebook.

Nanimos · 11. Dezember 2016

Der Fakt wird denk ich auch sein das der Akku da kaum lange halten wird. Wenn die Wifi Karte sich wechseln lassen tut dann kann man daraus sicher was machen.

Nanimos · 11. Dezember 2016

Hi @ll. Kann mir das jemand in Perl Compilieren? Ich benötige die uefidump.pl

Original Thread https://habrahabr.ru/post/182676/ Ab Punkt 11. ist das Script auch nochmal zu sehen. Danke!

Spoiler anzeigen

Code

#!/usr/bin/perl
#
#
# Please inform me if you found error/mistakes or enhance this script.
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in all
# copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
$| = 1;
use strict;
use warnings;
use utf8;
use Encode;
use Data::Dumper;
use vars qw($ROM $ROM_SIZE $IFR_PACKAGE_SIG @EFI_HII_PACKAGES %EFI_HII_PACKAGE_TYPE %LANGUAGES @EFI_HII_PACKAGE_FORMS %EFI $DEFAULT_LANGUAGE @STRINGS @TABS %TYPES);
################### !!! IMPORTANT !!! ###################
$IFR_PACKAGE_SIG = '$IFRPKG!';
#########################################################
$DEFAULT_LANGUAGE = 'en-US';
my $file = $ARGV[0] || "Setup.rom";
&SPECIFICATION_LOAD();
#---------------------------- MAIN PROGRAMM ----------------------------#
open($ROM, "<$file ") or die "ERROR : Cannot open $file.\n";
{
binmode $ROM;
undef $/;
$ROM_SIZE = -s $file;
}
#--------------------------------------------------------------------
# 1. Search IFR virtual package
my $header_offset = &IFR_PACKAGE_SIG();
print STDERR "IFR_PACKAGE_SIG not found!\nExiting programm...\n" and exit 1 if (!$header_offset);
#--------------------------------------------------------------------
# 2. Search EFI_HII_PACKAGE_HEADERs
@EFI_HII_PACKAGES = &EFI_HII_PACKAGES($header_offset);
#print Dumper(\@EFI_HII_PACKAGES);
#=head
#--------------------------------------------------------------------
# 3. Parse EFI_HII_PACKAGE_STRINGS
#print "Parsing language tables..\n";
%LANGUAGES = &EFI_HII_PACKAGE_STRINGS();
#printf "\tFound %d languages: %s\n", scalar keys %LANGUAGES, join ', ', sort keys %LANGUAGES;
@STRINGS = @{$LANGUAGES{$DEFAULT_LANGUAGE}->{'strings'}};
#print Dumper(\@STRINGS);
#print Dumper(\%LANGUAGES);
=head
# 3.1. Check languages length
my %length;
$length{$_} = scalar @{$LANGUAGES{$_}->{'strings'}} foreach (keys %LANGUAGES);
my $warn = 0;
foreach (keys %length)
{
next if $_ eq 'en-US';
if ($length{$_} != $length{'en-US'})
{
if (!$warn)
{
printf STDERR "\tWARNING: languages array length is different, must be %d elements:\n", $length{'en-US'};
$warn = 1;
}
printf "\t\t%s: (%d)\n", $_, $length{$_} - $length{'en-US'};
}
}
=cut
#--------------------------------------------------------------------
# 4. FORM packages parsing
@EFI_HII_PACKAGE_FORMS = &EFI_HII_PACKAGE_FORMS();
close($ROM);
#-----------------------------------------------------------------------#
#-----------------------------------------------------------------------#
sub str2hex {
return unpack ("H*", shift);
}
sub dec2bin {
return unpack("B32", pack("N", shift));
}
sub bin2dec {
return unpack("N", pack("B32", substr("0" x 32 . shift, -32)));
}
sub oplength {
my $data = shift;
my $length = unpack("C", $data);
return bin2dec(substr &dec2bin($length), -7);
}
sub EFI_IFR {
my $data = shift;
my $length = length($data);
my @opcodes;
#printf "length: %d, hex: %s\n", length($data), join (' ', unpack("(H2)*",substr($data,0,10)));
my $i = 0;
while ($i < $length)
{
my %op;
# Reading OPCODE
$op{'opcode'} = unpack("C", substr($data,$i,1));
$i++;
# Reading length
$op{'length'} = oplength(substr($data,$i,1));
$i++;
# Reading payload
$op{'payload'} = substr($data,$i,$op{'length'}-2);
$i += $op{'length'} -2;
# Setting indent
#$op{'indent'} = $INDENTS{$op{'opcode'}};
push @opcodes, \%op;
# printf "Opcode: %02X, Length: %d\n",$op{'opcode'} , $op{'length'};
# my $www = <STDIN>;
}
return \@opcodes;
}
sub EFI_HII_PACKAGE_FORMS {
my @forms = ();
foreach (@EFI_HII_PACKAGES)
{
my %pkg = %{$_};
my %form;
if ($_->{type} == 0x02)
{
# printf "EFI_HII_PACKAGE_FORMS offset int : %d, hex: (0x%08x)\n",$pkg{'int_offset'},$pkg{'int_offset'};
# Skeep first 4 bytes of FULLL_PACKAGE_LENGTH
my $FORM_PACKAGE_LENGTH = unpack('I', (data($pkg{int_offset} + 4, 3).pack("H",0)) );
my $FORM_PACKAGE_TYPE = unpack('C', (data($pkg{int_offset} + 7, 1)) );
$form{'length'} = $FORM_PACKAGE_LENGTH;
$form{'type'} = $FORM_PACKAGE_TYPE;
#printf " Form length: %s, type: %s\n", $FORM_PACKAGE_LENGTH, $FORM_PACKAGE_TYPE;
my $op_offset = $pkg{int_offset} + 8;
my $op_length = ($FORM_PACKAGE_LENGTH - 4);
$form{'opcodes'} = &EFI_IFR(data($op_offset,$op_length));
$form{'package'} = $_;
push @forms, \%form;
}
}
&EFI_IFR_FORM_SET(\@forms);
#print Dumper(\@forms);
return @forms;
}
sub EFI_IFR_FORM_SET {
my $forms = shift;
my @forms = @{$forms};
#print Dumper(\@forms);
foreach my $form (@forms)
{
my %form = %{$form};
my @ops = @{$form{'opcodes'}};
foreach (@ops)
{
my %op = %{$_};
&EFI_IFR_PRINT(\%op,\%{$form{'package'}});
}
print "\n";
}
}
sub fguid {
my $guid = shift;
my ($a, $b, $c, $d, $e);
$a = unpack("H*",scalar reverse(substr($guid,0,4)));
$b = unpack("H*",scalar reverse(substr($guid,4,2)));
$c = unpack("H*",scalar reverse(substr($guid,6,2)));
$d = unpack("H*",substr($guid,8,2));
$e = unpack("H*",substr($guid,10,6));
return sprintf("%s-%s-%s-%s-%s",$a,$b,$c,$d,$e);
}
sub EFI_HII_PACKAGE_STRINGS {
my %pkg;
foreach (@EFI_HII_PACKAGES)
{
%pkg = %{$_} and last if ($_->{type} == 0x04);
}
my $reader= 4; # current reading offset
my %languages;
while ($reader < $pkg{size}) # read until we in package
{
my $LANG_PACKAGE_LENGTH = unpack('I', (data($pkg{int_offset} + $reader, 3).pack("H",0)) );
my $LANG_PACKAGE_OFFSET = $pkg{int_offset} + $reader;
#print $LANG_PACKAGE_LENGTH,"\n";
if ($LANG_PACKAGE_LENGTH)
{
$reader += (3 + 1 + 42);
my $LANG_PACKAGE_NAME = (data($pkg{int_offset} + $reader, 5)); # skip 00 - end of header
$languages{$LANG_PACKAGE_NAME} = {'offset' => $LANG_PACKAGE_OFFSET, 'length' => $LANG_PACKAGE_LENGTH, 'name' => $LANG_PACKAGE_NAME };
}
$reader += $LANG_PACKAGE_LENGTH - (3 + 1 + 42);
}
foreach (keys %languages)
{
my %lang = %{$languages{$_}};
#print "Reading language from offset: ".$lang{'offset'}."\n";
#print "Language name is: ".$lang{'name'}."\n";
my $table = data($lang{'offset'}+46+6, $lang{'length'} - 46 - 6);
my @table = unpack('(H2)*',$table);
# Так как начало слова содержит флаг типа строки
# и мы не можем сделать сплит всей строки, будем читать побайтно
my @strings;
my $position=0;
my $word = undef;
my $eof = 0;
my $last = undef;
my $skip = 0;
my $word_start = 0;
push @strings, undef; # MEMEORY OFFSET CAN NOT BE 0
my %EFI_HII_STRING_BLOCK = map { $_ => 1 } ('10', '11', '12', '13', '15', '16', '17', '22', '30', '31', '32', '40');
for (my $l=0; $l < $#table; $l++)
{
my $byte = $table[$l];
if ( exists($EFI_HII_STRING_BLOCK{$byte}) && !$word && $last ne '14')
{
print STDERR "Unexpected EFI_HII_STRING_BLOCK -> BlockType = $byte found!\n";
printf STDERR "String offset: %d (0x%08x)\n", $lang{'offset'} + $l, $lang{'offset'} + $l;
exit 1;
}
$last = $byte and $word_start = 1 and next if ($byte eq '14'); # EFI_HII_SIBT_STRING_UCS2
if ($byte eq '21' && !$word && !$word_start ) # EFI_HII_SIBT_SKIP2
{
#print "SKEEP FOUND\n";
$skip = hex($table[$l+1]); # number of skips
$l += 2; # pass reading @table for next 2 bytes
while ($skip)
{
push @strings, "EFI_HII_SIBT_SKIP2-$skip";
$skip--;
}
next;
}
if ($byte eq '20' && !$word && !$word_start ) # EFI_HII_SIBT_DUPLICATE
{
push @strings, $strings[$#strings];
$l += 3;
next;
}
# If word end
if ($byte eq '00' && $table[$l+1] eq '00')
{
#print $word."\n";
push @strings, $word;
$word = undef;
$word_start = 0;
$l++;
next;
}
$word .= decode('utf-16le',pack("H*",$byte).pack("H*",$table[$l+1]));
$l++;
}
$languages{$_}->{'strings'} = \@strings;
}
return %languages;
#print Dumper(\%languages);
}
sub EFI_HII_PACKAGES {
my $offset = shift;
$offset += 8;
my @address = ();
while (1)
{
my $data = data($offset,8);
my $hex = unpack("H*",$data);
last if $hex !~ /^[ABCDEF0-9]{10}000000$/i;
if ($hex =~ /^[ABCDEF0-9]{6}8001000000$/i)
{
push @address, substr ((join '', (reverse ($hex =~ m/../g))), 10);
#my $address = substr ((join '', (reverse ($hex =~ m/../g))), 10);
#printf "$address - %s\n", hex($address);
}
$offset += 8;
}
my @pkg = ();
foreach (@address)
{
my %pkg;
$pkg{int_offset} = hex($_);
$pkg{hex_offset} = $_;
$pkg{size} = unpack("I*",data(hex($_),4));
$pkg{type} = unpack("C", data( hex($_)+7 , 1 ));
$pkg{type_name} = $EFI_HII_PACKAGE_TYPE{$pkg{type}}->{name};
$pkg{type_text} = $EFI_HII_PACKAGE_TYPE{$pkg{type}}->{text};
push @pkg, \%pkg;
}
return @pkg;
}
sub IFR_PACKAGE_SIG {
my $i = 0;
my $offset = 0;
my $seek = undef;
my @sig = split //, $IFR_PACKAGE_SIG;
while ($i <= $ROM_SIZE)
{
my $byte = data($i,1);
#last unless $byte;
# If we found start of header
if ($byte eq '$')
{
$offset = $i; # Store current offset
$seek = $byte; # Store begining of the signature
$i++;
next;
}
if ($offset) # just to save CPU time
{
if (scalar grep $byte eq $_, @sig)
{
$seek .= $byte if ($IFR_PACKAGE_SIG =~ $seek.$byte );
last if ($IFR_PACKAGE_SIG eq $seek );
}
else
{
$offset = 0;
$seek = undef;
}
}
$i++;
}
#printf "\nIFR_PACKAGE_SIG found at offset: %d (0x%08x)\n", ($offset, $offset) if $offset;
return $offset;
}
sub data {
my $offset = shift;
my $length = shift;
my $data;
seek $ROM, $offset, 0;
sysread $ROM, $data, $length;
return $data;
};
sub TabSpace {
# Pushing
push @TABS, shift;
return ' ' x (scalar @TABS - 1);
}
sub TabClose {
my $length = scalar @TABS;
my $return = "";
if ($length)
{
my $opcode = pop @TABS;
if ($opcode == $EFI{EFI_IFR_GRAY_OUT_IF_OP})
{
$return = sprintf "\xE2\x94\x94- END IF Grayout;\n";
}
elsif ($opcode == $EFI{EFI_IFR_SUPPRESS_IF_OP})
{
$return = sprintf "\xE2\x94\x94- END IF Suppress;\n";
}
else
{
$return = "What the fuck?";
}
}
return $return;
}
sub EFI_IFR_PRINT
{
my $op = shift;
my $package = shift;
my $TabSpace = '';
my %op = %{$op};
my %package = %{$package};
if ($op{'opcode'} != $EFI{EFI_IFR_FORM_SET_OP} and scalar @TABS) {
if ($op{'opcode'} == $EFI{EFI_IFR_SUPPRESS_IF_OP} or $op{'opcode'} == $EFI{EFI_IFR_GRAY_OUT_IF_OP})
{
$TabSpace = sprintf "|";
}
elsif ( $op{'opcode'} == $EFI{EFI_IFR_END_OP} )
{
$TabSpace = sprintf "%s",'| ' x (scalar @TABS - 1 );
}
else
{
$TabSpace = sprintf "%s",'| ' x (scalar @TABS);
}
print $TabSpace;
}
if ($op{'opcode'} == $EFI{EFI_IFR_FORM_SET_OP}) { # 0x0E
my $Guid = substr($op{'payload'},0,16);
my $FormSetTitle = unpack("S2",substr($op{'payload'},16,2));
my $Help = unpack("S2",substr($op{'payload'},18,2));
my $Flags = substr($op{'payload'},20,2);
my $ClassGuid = substr($op{'payload'},22,16);
printf "\n\xE2\x95\x94%s\xE2\x95\x97\n","\xE2\x95\x90"x116;
printf "\x{E2}\x{95}\x{91} FormSet: '%-62sGUID: %s \xE2\x95\x91\n", ($STRINGS[$FormSetTitle]."'", fguid($Guid));
printf "\x{e2}\x{95}\x{9f}%s\x{e2}\x{95}\x{a2}\n","\x{e2}\x{94}\x{80}"x116;
if ($STRINGS[$Help] and $STRINGS[$Help] ne ' ')
{
printf " \\Help text: '%s'\n", $STRINGS[$Help];
}
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_GUID_OP}) { # 0x5F
my $Guid = substr($op{'payload'},0,16);
my $Data = unpack("H*", substr($op{'payload'},16));
#printf "\x{E2}\x{95}\x{91} Operation data: '%-55sGUID: %s \xE2\x95\x91\n", $Data, &fguid($Guid);
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_DEFAULTSTORE_OP}) { # 0x5C
my $DefaultId = unpack("S2", substr($op{'payload'},2,2));
my $DefaultName = unpack("S2", substr($op{'payload'},2,2));
#printf "EFI_IFR_DEFAULTSTORE_OP, length: %d, DefaultId: %s, DefaultName: %s \n",length($op{'payload'}),$DefaultId,$DefaultName ;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_VARSTORE_OP}) { # 0x24
# typedef struct _EFI_IFR_VARSTORE {
# EFI_IFR_OP_HEADER Header;
# EFI_GUID Guid;
# EFI_VARSTORE_ID VarStoreId;
# UINT16 Size;
# UINT8 Name[1];
# } EFI_IFR_VARSTORE;
#printf "EFI_IFR_VARSTORE_OP, length: %d \n",length($op{'payload'});
my $Guid = substr($op{'payload'},0,16);
my $VarStoreId = unpack("S2", substr($op{'payload'},16,2));
my $Size = unpack("S2", substr($op{'payload'},18,2));
my $Name = substr($op{'payload'},20,12);
printf "\x{E2}\x{95}\x{91} VarStore Id: '0x%x', Size: '%s', Name: '%s' GUID: %s \x{E2}\x{95}\x{91}\n", $VarStoreId, $Size, $Name, &fguid($Guid);
printf "\xE2\x95\x9A%s\xE2\x95\x9D\n","\xE2\x95\x90"x116;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_FORM_OP}) { # 0x01
my $FormId = unpack("S2",substr($op{'payload'},0,2));
my $FormTitle = unpack("S2",substr($op{'payload'},2,2));
printf "\x{e2}\x{94}\x{8c}%s\x{e2}\x{94}\x{90}\n","\x{e2}\x{94}\x{80}"x116;
printf "\x{e2}\x{94}\x{82} Form Name: '%-86s [ ID: '0x%04x' ]\x{e2}\x{94}\x{82}\n", ($STRINGS[$FormTitle]."'", $FormId);
printf "\x{e2}\x{94}\x{94}%s\x{e2}\x{94}\x{98}\n","\x{e2}\x{94}\x{80}"x116;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_GRAY_OUT_IF_OP}) { # 0x19
printf "%s\x{E2}\x{94}\x{8C}- Grayout IF:\n",TabSpace($op{'opcode'});
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_SUPPRESS_IF_OP}) { # 0x0A
printf "%s\xE2\x94\x8C- Suppress IF:\n",TabSpace($op{'opcode'});
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_END_OP}) { # 0x29
printf "%s",&TabClose($op{'opcode'});
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_EQ_ID_VAL_OP}) { # 0x12
my $QuestionId = unpack("S2",substr($op{'payload'},0,2));
my $Value = unpack("S2",substr($op{'payload'},2,2));
printf "Question [ ID: '0x%02x' ] == 0x%02x\n", $QuestionId, $Value,;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_AND_OP}) { # 0x15
printf "AND expression\n";
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_SUBTITLE_OP}) { # 0x02
my $Prompt = unpack("S2",substr($op{'payload'},0,2));
my $Help = unpack("S2",substr($op{'payload'},2,2));
printf "Subtitle: '%s'\n", ($STRINGS[$Prompt]) if defined $STRINGS[$Prompt] and $STRINGS[$Prompt] ne ' ';
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_DEFAULT_OP}) { # 0x5B
my $DefaultId = unpack("S2",substr($op{'payload'},0,2));
my $Type = unpack("C",substr($op{'payload'},2,1));
my $value;
if ($Type == 0) {
$value = unpack("C",substr($op{'payload'},3,1));
}
elsif ($Type == 1) {
$value = unpack("S2",substr($op{'payload'},3,2));
}
elsif ($Type == 2) {
$value = unpack("S2",substr($op{'payload'},3,2));
}
elsif ($Type == 5) {
$value = sprintf("%02d",unpack("C",substr($op{'payload'},3,1))).':'.sprintf("%02d",unpack("C",substr($op{'payload'},4,1))).':'.sprintf("%02d",unpack("C",substr($op{'payload'},5,1)));
}
elsif ($Type == 6) {
$value = unpack("S2",substr($op{'payload'},3,2)).'/'.sprintf("%02d",unpack("C",substr($op{'payload'},5,1))).'/'.sprintf("%02d",unpack("C",substr($op{'payload'},6,1)));
}
else {
$value = unpack("S*",substr($op{'payload'},3,4));
}
printf " Default value: '%s', Type: 0x%02x\n",$value, $Type;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_TRUE_OP}) { # 0x46
printf "EQ == TRUE\n";
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_TEXT_OP}) { # 0x03
my $Prompt = unpack("S2",substr($op{'payload'},0,2));
my $Help = unpack("S2",substr($op{'payload'},2,2));
my $TextTwo = unpack("S2",substr($op{'payload'},4,2));
my $t2 = "";
$t2 = $STRINGS[$TextTwo] if (defined $STRINGS[$TextTwo]);
printf "Text: '%-32.32sDefault: '%-32.32sHelp: '%s'\n", $STRINGS[$Prompt]."'", $t2."'", $STRINGS[$Help];
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_UINT64_OP}) { # 0x45
my $Value = $op{'payload'};
printf "VALUE = %s\n", unpack("S*",$Value);
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_EQUAL_OP}) { # 0x2F
printf "EQUAL expression\n";
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_EQ_ID_LIST_OP}) { # 0x14
my $QuestionId = unpack("S2", substr($op{'payload'},0,2));
my $ListLength = unpack("S2", substr($op{'payload'},2,2));
my @ValueList = unpack("(S4)*", substr($op{'payload'},4));
@ValueList = map {sprintf "'0x%02x'", $_ } @ValueList;
printf "LIST [ ID: '0x%02x' ] in (%s)\n",$QuestionId, join ",", @ValueList;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_OR_OP}) { # 0x16
printf "OR expression\n";
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_NOT_OP}) { # 0x17
printf "NOT expression \n";
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_TIME_OP}) {# 0x1b
my $Prompt = unpack("S2",substr($op{'payload'},0,2));
my $Help = unpack("S2",substr($op{'payload'},2,2));
my $QuestionId = unpack("S2",substr($op{'payload'},4,2));
my $VarStoreId = unpack("S2",substr($op{'payload'},8,2));
#my $VarName = unpack("S2",substr($op{'payload'},8,1));
#my $VarOffset = unpack("S2",substr($op{'payload'},9,1));
#my $Flags = unpack("S2",substr($op{'payload'},9,1));
printf "Time: '%s' [ QuestionId: '0x%02x', VarStore: '0x%02x', Help: '%s' ]\n", $STRINGS[$Prompt],$QuestionId,$VarStoreId,$STRINGS[$Help] ;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_DATE_OP}) {# 0x1A
my $Prompt = unpack("S2",substr($op{'payload'},0,2));
my $Help = unpack("S2",substr($op{'payload'},2,2));
my $QuestionId = unpack("S2",substr($op{'payload'},4,2));
my $VarStoreId = unpack("S2",substr($op{'payload'},8,2));
#my $VarName = unpack("S2",substr($op{'payload'},8,1));
#my $VarOffset = unpack("S2",substr($op{'payload'},9,1));
#my $Flags = unpack("S2",substr($op{'payload'},9,1));
printf "Date: '%s' [ QuestionId: '0x%02x', VarStore: '0x%02x', Help: '%s' ]\n", $STRINGS[$Prompt],$QuestionId,$VarStoreId,$STRINGS[$Help] ;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_NUMERIC_OP}) {# 0x07
my $Prompt = unpack("S2",substr($op{'payload'},0,2));
my $Help = unpack("S2",substr($op{'payload'},2,2));
my $QuestionId = unpack("S2",substr($op{'payload'},4,2));
my $VarStoreId = unpack("S2",substr($op{'payload'},8,2));
#my $VarStoreInfo = unpack("C",substr($op{'payload'},10,1));
my $Type = unpack("C",substr($op{'payload'},11,1));
my $MinValue = unpack("C",substr($op{'payload'},12,1));
my $MaxValue = unpack("C",substr($op{'payload'},13,1));
my $Step = unpack("C",substr($op{'payload'},14,1));
printf "Number question: Prompt: %s, Help: %s\n",($STRINGS[$Prompt], $STRINGS[$Help]) if $Prompt;
printf "%s \x{E2}\x{94}\x{94}- [ QuestionId: '0x%02x', VarStore: '0x%02x' , Type: '%02x', MinValue: '%d', MaxValue: '%d', Step: '%d' ]\n",($TabSpace,$QuestionId, $VarStoreId, $Type,$MinValue, $MaxValue, $Step) if $Prompt;;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_REF_OP}) {# 0x0F
my $Prompt = unpack("S2",substr($op{'payload'},0,2));
my $Help = unpack("S2",substr($op{'payload'},2,2));
my $QuestionId = unpack("S2",substr($op{'payload'},4,2));
my $VarStoreId = unpack("S2",substr($op{'payload'},8,2));
my $FormId = unpack("S2>*!",substr($op{'payload'},11,4));
printf "Reference: '%s' [ FormID: '0x%04x', QuestionId: '0x%02x', VarStore: '0x%02x' ]\n", $STRINGS[$Prompt], $FormId, $QuestionId, $VarStoreId;
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_ACTION_OP}) {# 0x0C
my $Prompt = unpack("S2",substr($op{'payload'},0,2));
my $Help = unpack("S2",substr($op{'payload'},2,2));
my $QuestionId = unpack("S2",substr($op{'payload'},4,2));
my $VarStoreId = unpack("S2",substr($op{'payload'},8,2));
#my $VarStoreInfo = unpack("C",substr($op{'payload'},8,1));
printf "Action: '%-32.32s [ QuestionId: '0x%02x', VarStore: '0x%02x', Help: %s ] \n", ($STRINGS[$Prompt]."'", $QuestionId,$VarStoreId, $STRINGS[$Help]);
#printf "%s \x{E2}\x{94}\x{94}- \n", ($TabSpace if $STRINGS[$Prompt];
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_PASSWORD_OP}) {# 0x08
my $Prompt = unpack("S2", substr($op{'payload'},0,2));
my $Help = unpack("S2", substr($op{'payload'},2,2));
my $VarStoreId = unpack("S2", substr($op{'payload'},8,2));
printf "Password: %-32.32s [ VarStore: '0x%02x', Help: '%s']\n", ($STRINGS[$Prompt], $VarStoreId, $STRINGS[$Help]);
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_ONE_OF_OP}) { # 0x05
my $Prompt = unpack("S2", substr($op{'payload'},0,2));
my $Help = unpack("S2", substr($op{'payload'},2,2));
my $QuestionId = unpack("S2", substr($op{'payload'},4,2));
my $VarStoreId = unpack("S2", substr($op{'payload'},8,2));
# my $VarOffset = unpack("S2", substr($op{'payload'},4,2));
printf "Select option: '%-32.32s[ VarStore: '0x%02x', QuestionId: '0x%02x', Help: '%s']\n", ($STRINGS[$Prompt]."'", $VarStoreId, $QuestionId, (defined $STRINGS[$Help] ? $STRINGS[$Help] : '' ));
}
elsif ($op{'opcode'} == $EFI{EFI_IFR_ONE_OF_OPTION_OP}) { # 0x09
my $Option = unpack("S2", substr($op{'payload'},0,2));
my $Flags = str2hex(substr($op{'payload'},2,1));
my $Type = unpack("C", substr($op{'payload'},3,1));
my $Value = unpack("C*", substr($op{'payload'},4,8));
# oid, value, flags, key = struct.unpack("<HHBH", self.payload)
# print ts+"Option '%s' = 0x%x Flags 0x%x Key 0x%x"%(s[oid], value, flags, key)
printf " Option: '%-37.37s[ Value: '%s' Default: '%-6s Type: '%-6.6s ]\n", ($STRINGS[$Option]."'", $Value, ($Flags eq '10' ? 'true' : 'false')."'", $TYPES{$Type}."'");
}
else {
printf "--> UNKNOWN OPCODE: %02X, length: %d\n", $op{'opcode'}, $op{'length'};
exit 1;
}
}
sub SPECIFICATION_LOAD
{
$EFI{EFI_IFR_FORM_OP} = 0x01;
$EFI{EFI_IFR_SUBTITLE_OP} = 0x02;
$EFI{EFI_IFR_TEXT_OP} = 0x03;
$EFI{EFI_IFR_IMAGE_OP} = 0x04;
$EFI{EFI_IFR_ONE_OF_OP} = 0x05;
$EFI{EFI_IFR_CHECKBOX_OP} = 0x06;
$EFI{EFI_IFR_NUMERIC_OP} = 0x07;
$EFI{EFI_IFR_PASSWORD_OP} = 0x08;
$EFI{EFI_IFR_ONE_OF_OPTION_OP} = 0x09;
$EFI{EFI_IFR_SUPPRESS_IF_OP} = 0x0A;
$EFI{EFI_IFR_LOCKED_OP} = 0x0B;
$EFI{EFI_IFR_ACTION_OP} = 0x0C;
$EFI{EFI_IFR_RESET_BUTTON_OP} = 0x0D;
$EFI{EFI_IFR_FORM_SET_OP} = 0x0E;
$EFI{EFI_IFR_REF_OP} = 0x0F;
$EFI{EFI_IFR_NO_SUBMIT_IF_OP} = 0x10;
$EFI{EFI_IFR_INCONSISTENT_IF_OP} = 0x11;
$EFI{EFI_IFR_EQ_ID_VAL_OP} = 0x12;
$EFI{EFI_IFR_EQ_ID_ID_OP} = 0x13;
$EFI{EFI_IFR_EQ_ID_LIST_OP} = 0x14;
$EFI{EFI_IFR_AND_OP} = 0x15;
$EFI{EFI_IFR_OR_OP} = 0x16;
$EFI{EFI_IFR_NOT_OP} = 0x17;
$EFI{EFI_IFR_RULE_OP} = 0x18;
$EFI{EFI_IFR_GRAY_OUT_IF_OP} = 0x19;
$EFI{EFI_IFR_DATE_OP} = 0x1A;
$EFI{EFI_IFR_TIME_OP} = 0x1B;
$EFI{EFI_IFR_STRING_OP} = 0x1C;
$EFI{EFI_IFR_REFRESH_OP} = 0x1D;
$EFI{EFI_IFR_DISABLE_IF_OP} = 0x1E;
$EFI{EFI_IFR_ANIMATION_OP} = 0x1F;
$EFI{EFI_IFR_TO_LOWER_OP} = 0x20;
$EFI{EFI_IFR_TO_UPPER_OP} = 0x21;
$EFI{EFI_IFR_MAP_OP} = 0x22;
$EFI{EFI_IFR_ORDERED_LIST_OP} = 0x23;
$EFI{EFI_IFR_VARSTORE_OP} = 0x24;
$EFI{EFI_IFR_VARSTORE_NAME_VALUE_OP} = 0x25;
$EFI{EFI_IFR_VARSTORE_EFI_OP} = 0x26;
$EFI{EFI_IFR_VARSTORE_DEVICE_OP} = 0x27;
$EFI{EFI_IFR_VERSION_OP} = 0x28;
$EFI{EFI_IFR_END_OP} = 0x29;
$EFI{EFI_IFR_MATCH_OP} = 0x2A;
$EFI{EFI_IFR_GET_OP} = 0x2B;
$EFI{EFI_IFR_SET_OP} = 0x2C;
$EFI{EFI_IFR_READ_OP} = 0x2D;
$EFI{EFI_IFR_WRITE_OP} = 0x2E;
$EFI{EFI_IFR_EQUAL_OP} = 0x2F;
$EFI{EFI_IFR_NOT_EQUAL_OP} = 0x30;
$EFI{EFI_IFR_GREATER_THAN_OP} = 0x31;
$EFI{EFI_IFR_GREATER_EQUAL_OP} = 0x32;
$EFI{EFI_IFR_LESS_THAN_OP} = 0x33;
$EFI{EFI_IFR_LESS_EQUAL_OP} = 0x34;
$EFI{EFI_IFR_BITWISE_AND_OP} = 0x35;
$EFI{EFI_IFR_BITWISE_OR_OP} = 0x36;
$EFI{EFI_IFR_BITWISE_NOT_OP} = 0x37;
$EFI{EFI_IFR_SHIFT_LEFT_OP} = 0x38;
$EFI{EFI_IFR_SHIFT_RIGHT_OP} = 0x39;
$EFI{EFI_IFR_ADD_OP} = 0x3A;
$EFI{EFI_IFR_SUBTRACT_OP} = 0x3B;
$EFI{EFI_IFR_MULTIPLY_OP} = 0x3C;
$EFI{EFI_IFR_DIVIDE_OP} = 0x3D;
$EFI{EFI_IFR_MODULO_OP} = 0x3E;
$EFI{EFI_IFR_RULE_REF_OP} = 0x3F;
$EFI{EFI_IFR_QUESTION_REF1_OP} = 0x40;
$EFI{EFI_IFR_QUESTION_REF2_OP} = 0x41;
$EFI{EFI_IFR_UINT8_OP} = 0x42;
$EFI{EFI_IFR_UINT16_OP} = 0x43;
$EFI{EFI_IFR_UINT32_OP} = 0x44;
$EFI{EFI_IFR_UINT64_OP} = 0x45;
$EFI{EFI_IFR_TRUE_OP} = 0x46;
$EFI{EFI_IFR_FALSE_OP} = 0x47;
$EFI{EFI_IFR_TO_UINT_OP} = 0x48;
$EFI{EFI_IFR_TO_STRING_OP} = 0x49;
$EFI{EFI_IFR_TO_BOOLEAN_OP} = 0x4A;
$EFI{EFI_IFR_MID_OP} = 0x4B;
$EFI{EFI_IFR_FIND_OP} = 0x4C;
$EFI{EFI_IFR_TOKEN_OP} = 0x4D;
$EFI{EFI_IFR_STRING_REF1_OP} = 0x4E;
$EFI{EFI_IFR_STRING_REF2_OP} = 0x4F;
$EFI{EFI_IFR_CONDITIONAL_OP} = 0x50;
$EFI{EFI_IFR_QUESTION_REF3_OP} = 0x51;
$EFI{EFI_IFR_ZERO_OP} = 0x52;
$EFI{EFI_IFR_ONE_OP} = 0x53;
$EFI{EFI_IFR_ONES_OP} = 0x54;
$EFI{EFI_IFR_UNDEFINED_OP} = 0x55;
$EFI{EFI_IFR_LENGTH_OP} = 0x56;
$EFI{EFI_IFR_DUP_OP} = 0x57;
$EFI{EFI_IFR_THIS_OP} = 0x58;
$EFI{EFI_IFR_SPAN_OP} = 0x59;
$EFI{EFI_IFR_VALUE_OP} = 0x5A;
$EFI{EFI_IFR_DEFAULT_OP} = 0x5B;
$EFI{EFI_IFR_DEFAULTSTORE_OP} = 0x5C;
$EFI{EFI_IFR_FORM_MAP_OP} = 0x5D;
$EFI{EFI_IFR_CATENATE_OP} = 0x5E;
$EFI{EFI_IFR_GUID_OP} = 0x5F;
$EFI{EFI_IFR_SECURITY_OP} = 0x60;
%EFI_HII_PACKAGE_TYPE =
(
0x00 => { name => 'EFI_HII_PACKAGE_TYPE_ALL' , text => 'Pseudo-package type' },
0x01 => { name => 'EFI_HII_PACKAGE_TYPE_GUID' , text => 'Package type where the format of the data is specified using a GUID immediately following the package header' },
0x02 => { name => 'EFI_HII_PACKAGE_FORMS' , text => 'Forms package' },
0x04 => { name => 'EFI_HII_PACKAGE_STRINGS' , text => 'Strings package' },
0x05 => { name => 'EFI_HII_PACKAGE_FONTS' , text => 'Fonts package' },
0x06 => { name => 'EFI_HII_PACKAGE_IMAGES' , text => 'Images package' },
0x07 => { name => 'EFI_HII_PACKAGE_SIMPLE_FONTS' , text => 'Simplified (8x19, 16x19) Fonts package' },
0x08 => { name => 'EFI_HII_PACKAGE_DEVICE_PATH' , text => 'Binary-encoded device path' },
0x09 => { name => 'EFI_HII_PACKAGE_KEYBOARD_LAYOUT' , text => 'Used to mark the end of a package list' },
0x0A => { name => 'EFI_HII_PACKAGE_ANIMATIONS' , text => 'Animations package' },
0xDF => { name => 'EFI_HII_PACKAGE_END' , text => 'Package types reserved for use by platform firmware implementations' },
0xE0 => { name => 'EFI_HII_PACKAGE_TYPE_SYSTEM_BEGIN' , text => 'Package types reserved for use by platform firmware implementations' },
);
%TYPES =
(
0x00 => 'int8',
0x01 => 'int16',
0x02 => 'int32',
0x03 => 'int64',
0x04 => 'bool',
0x05 => 'time',
0x06 => 'date',
0x07 => 'string',
0x08 => 'other',
);
}

Alles anzeigen

Nanimos · 11. Dezember 2016

Für beide System Win und Osx wird dir nur ein Bios Unlock Helfen. Sonst keine Chance! Du kannst auch nicht ein gepatchtes Bios nehmen von jemand anderem der das gleich System hat. Es muss Speziell für dein Notbook gepatcht sein. Frag doch einfach mal beim Forum an. Nebenbei kannst dir dann noch das Advance Menu Freischalten lassen

Nanimos · 11. Dezember 2016

Hab grade mal in die Liste geschaut. Hätte ich gestern auch machen können ich Doofi. Dir wird wohl nichts anderes übrig bleiben die Karte zu wechseln. 14e4-43ec wird da nicht mit aufgeführt. Somit keine Möglichkeit die Unter Mac OSx zum laufen zu bekommen. Vielleicht bekommst ja Bluetooth Aktiviert unter Systemeinstellung. Da sollte das Icon vom Bluetooth zu sehen sein. Um die Karte Tauschen zu können brauchst du ein gepatchtes Bios da Lenovo eine Speere (whitelist) im Bios hat. Auf bios-mods.com kann man sich da Helfen lassen oder vielleicht hat jemand im Forum genug Erfahrung damit.

Mfg

Nanimos · 10. Dezember 2016

bkm ich brauch die Dsdt mit der du Starten tust! Die Originale DSDT kann ich Patchen aber dann sind deine Patche mit weg, falls du schon mal deine DSDT gepatcht hast. Mach es bitte so wie ich beschrieben habe. Schick mir noch deine Config.plist per PN.

Die beiden Brcm kexte nach System/Library/Extensions installieren. Wenn du alles gemacht hast, dann Kext Utility.app starten und dann Neustart. Hab paar kleine Sachen an der DSDT gemacht. Sprich Teste auf dem Stick die Config.plist und DSDT bevor du die auf der HDD packst.

Wenn was unklar ist Frag vorher.

Mag

Nanimos · 9. Dezember 2016

@al6042 Dienstag, 20:52 da steht die Antwort Deine ist deshalb nicht richtig weil die nicht die AirPortBrcm4360.kext laden tut. Die 43b1 ist die ID vom der Karte selbst und dort sind keine Treiber in der AirPortBrcm4360.kext enthalten. Also muss man die ID Faken um diese LAden zu können.

Cu und schönen Abend noch.

Nanimos · 9. Dezember 2016

Die Vorschläge hängen ab von deinem Budget. Um Support hier zu erhalten brauchst du eine gültige Lizenz. Das heißt minimal muss du Snow Leopard Kaufen. Aber als Installation für Aktuelle Mac Systeme ist Snow nicht mehr zu Empfehlen. Yosemite , El Capitain und Sierra sollte schon sein. Mit eine gültigen Lizenz bekommt man diese Umsonst.

Willkommen! Melde dich an oder registriere dich.

Beiträge von Nanimos

Acer Aspire E5 575-57NR startet Clover nicht

Acer Aspire E5 575-57NR startet Clover nicht

Acer Aspire E5 575-57NR startet Clover nicht

Acer Aspire E5 575-57NR startet Clover nicht

Acer Aspire E5 575-57NR startet Clover nicht

AppleALC - der dynamische AppleHDA Patcher

AppleALC - der dynamische AppleHDA Patcher

AppleALC - der dynamische AppleHDA Patcher

Continuity, Airdrop und HandOff - Erfahrungen kosten halt manchmal Geld

Continuity, Airdrop und HandOff - Erfahrungen kosten halt manchmal Geld

Continuity, Airdrop und HandOff - Erfahrungen kosten halt manchmal Geld

Continuity, Airdrop und HandOff - Erfahrungen kosten halt manchmal Geld

Wer kennt sich mit Perl aus?

Acer Swift 3

Wer kennt sich mit Perl aus?

Broadcom BCM94356ZAE NGFF

Broadcom BCM94356ZAE NGFF

Broadcom BCM94356ZAE NGFF

AzureWave AW-CE123H 10.12.1

Hallo aus dem Osnabrücker Land