Beiträge von terlens

  • 【Help】Normal operation, a sudden crash~

    @al6042 Danke Antwort~


    1.Boot loader is Ozmosis （Use of the forum Z87HD3_OZ167X.F8.zip，The same problem also occurs with clover。）
    2.Install the original El Capitan directly through the U disk（Yosemite also have the same problem）
    3.Because GTX950 can not drive, open the opportunity to automatically restart, so interim nvda_drv = 0, ready to be installed into the system（It has nothing to do with graphics, but also had the same problem using GTX650【not added nvda_drv = 0 and nv_disable=1】）

  • 【Help】Normal operation, a sudden crash~

    我是一名中国人，翻译可能不到位，抱歉。
    I am a Chinese, the translation may not be in place, I'm sorry.



    我电脑黑苹果开机会死机，不知道是什么原因。
    Computer running a few minutes each boot will crash, I do not know what the reasons are.



    10.10和10.11均有这样的问题，已经加入了DSDT
    10.10 and 10.11 are such problems, I have joined the DSDT


    配置/Configuration:
    主板/Motherboard：Z87-HD3
    CPU：i7-4770
    显卡/Graphics：GTX950


    下面是-v启动后的代码/Here is the error code (bootargs:-v)


  • HELP！！！ 【Z87-HD3】

    中文版：
    我是一名中国人，看不懂德文，抱歉~ 我用了论坛里的“Z87HD3_OZ167X.F8”固件刷了主板，想修改里面的OzmosisDefaults文件，我从固件里通过MMTool已经提取了这个ffs文件，请问如何转换为plist文件，我现在无法进行修改，或者希望专家帮我做导出一份已经生成好的，我需要“Z87HD3_OZ167X.F8”里的OzmosisDefaults.plist,,谢谢了！！！


    English：
    I am a Chinese, do not understand German, I'm sorry - I used the forum of "Z87HD3_OZ167X.F8" firmware brush motherboard, want to change the inside of OzmosisDefaults file, I MMTool have been extracted by the firmware in this ffs file , how to convert plist file, I can not be modified, or if you want to help me do the experts have generated an export good, I need "Z87HD3_OZ167X.F8" in the Ozmosis Defaults.plist,Help,,thank you! ! !


    Deutsch Version：
    Ich bin ein Chinese, kein Deutsch verstehen, tut mir leid - Ich habe das Forum von "Z87HD3_OZ167X.F8" Firmware-Bürste Motherboard, wollen die Innenseite OzmosisDefaults Datei zu ändern, MMTool ich von der Firmware in diesem extrahiert wurden FFS-Datei , wie man plist-Datei umzuwandeln, ich kann nicht modifiziert werden, oder wenn Sie helfen mir zu tun haben wollen, die Experten ein Export gute erzeugt wird, ich brauche "Z87HD3_OZ167X.F8" im OzmosisDefaults.plist,, Vielen Dank! ! !