Beiträge von thadeth

  • [English] GA-Z97-HD3 with HD4600 can not boot

    This time it gives me kernel panic and turns the screen off at the same moment. :|


    BTW if I put any supported nVidia VGA will I be able to install without problems ?


    EDIT:


    I managed to somehow install El Capitan on the same configuration. Now the only problem is that it shows HD 4600 with 5mb or 7mb memory in system>about this mac. Also the screen is flickering and I thing QE/CI is disabled. In system profiler it says kext not loaded but it shows the vga with ID and everything normal. I tried with FakePCIID.kext and FakePCIID_HD4600_HD4400.kext but does not work.

  • [English] GA-Z97-HD3 with HD4600 can not boot

    rubenszy I tried this now, the only thing changes when I add -x -v to the flags already in the config.plist and after Missing bluetooth controller Transport there are 2 more lines and it stops loading again.


    Standby delay is not specified! Defaulting to 0x1068
    ErP Timer is not specified! Defaulting to 0x3840


    Then it hangs.


    When I try booting as it is (without adding -x -v) it hangs also like before.

  • [English] GA-Z97-HD3 with HD4600 can not boot

    Thank you people for your help!


    I tried the EFI folder from rubenszy but it stll gets stucked at Missing Bluetooth Controller Transport


    USB plugged into USB 2 port. Changed ssd with normal HDD to test if ssd was making a problem.
    Also I forgot to say that I use VGA port LCD monitor because I do not have one with HDMI right now. Is that a problem ?
    Thank you again :)

  • [English] GA-Z97-HD3 with HD4600 can not boot

    Greetings, I have spent many days on forums trying to find a solution to my problem... I hope someone can help me here.
    I want to install El Capitan to my computer with the following specs:


    GA-Z97-HD3 rev.2.0
    i5-4460 with intel HD 4600
    4GB RAM 1600 Mhz
    250GB intel SSD (or ordinary HDD i can switch)


    BIOS:
    F6 Version.- Load the default settings
    - Disable VT-d
    - Set xHCI Auto mode
    - Activate xHCI Hand-Off
    - Activate EHCI Hand-Off
    - Set the config. SATA AHCI


    The problem is that I can not even boot into installation, I have tried combinations with boot flags -x -v -maxmem=4096 nv_disable=1 IGPEnabler=Yes ig-platform-id=0x0300220D but always gets stucked (sometimes Kernel panic, sometimes still waiting for root device...)
    I don't mind if Yosemite is possible to install to this configuration, I just need a stable PC on hackintosh to manage data and surf the net. Thank you