The bios ( iMac14.2 sierra ) doesn't work well.
Bios doesn't cognize PCI-E and PCI slot in OSX.
Even put into graphics card, can't boot.
my motherboard and graphics card are still work perfectly with original bios in Gigabyte website.
Beiträge von Minsu Kang
-
-
How do you think about this list
I want to buy one of themGA-Z97X-UD5H-BK
GA-Z97X-UD5H
GA-Z97X-SOC
GA-Z97X-SOC Force
GA-Z97X-Gaming GT
GA-Z97X-Gaming 7I have 3 PC, and two of them are hackintosh with i7 4790K and E3-1231v3. (last pc are Xpenology system)
Yesterday, I already bought GA-Z97X-UD5H and now I hope to buy 1 more other mainboard. ( Black or Red color)BUT............... seriously dude
GA-Z97X-UD5H rom file in the Download page doesn't work well. ( iMac14.2 sierra version)
In detail, don't work with PCI-E and PCI slot. If I put my graphics card into the PCI-E, freezing at bios.
And OSX don't cognize my wifi+bt card(bcm94360cd).At first, I thought about mainboard problem.
But I tried to re-install original mainboard rom file, then everything okay with windows 10.Well, I know it's not his fault (the the person who made the rom files) and he have not responsibility at all. ( rather I feel thanks for him )
But I bought two mainboard with the trust of rom files and rom file maker in this site. I spent preety much money and time for this.So I feel sooooooooo tired .. I think like 'rather go back to clover is better?..' now.
If I got two of GA-Z97X-D3H, it can possible to everything work well? ( is it right? or you mean GA-Z97-D3H?)
Or am I use perfectly with this mainboard(GA-Z97X-UD5H) or one of the mainboard of my list? -
okay. Finally I finish the test OSX 10.11 and 10.12
And my sound doesn't work.I make a decision. I will change my mainboard to GIGABYTE Z97 model.
-
I already do. I just want to use sound in the bios
(I just.... if i can use sould wih kext or something, thats okay too.
But not working now, you know)Anyway I will try more today night.
I solved the problem before. The real problem is type of USB.
my mainboard only access my old usb disk(USB2.0/2GB USB)
And after you said me about internal graphics driver, I always use internal only. -
I mean that when i set last bios, my PC don't boot. ( Like the first bios i used )
But I remember you give me a correct bios before.So I guess you make this with little mistake
( the reason why ? cause I used the well-work bios file you made, but the last bios doesn't work ) -
I believe you can my friend,
I'll try one more time. sierra and el capitan both.
I might you mistake something small things. please check once more time. -
okay, i'll do
@Fredde2209
hey my friend,
that file NOT work at all!
like the file in "download" tap
( Like I mentioned it first ) -
nothing happened.
I try to re-install OSX now.Is it okay to install OSX sierra?
Im use sierra now -
i was installed this : https://sourceforge.net/projects/voodoohda/
so i uninstall voodoohda to this way
Open Terminal. Then:
sudo rm -r /System/Library/Extensions/AppleHDADisabler.kext
sudo rm -r /Applications/VoodooHdaSettingsLoader.app
sudo rm -r /System/Library/Extensions/VoodooHDA.kext
sudo rm -r /System/Library/PreferencePanes/VoodooHDA.prefPaneI think I was do right way
-
Sadly that's not works...
Even Hwmonitor not works tooT_T why...
and... can i use my wifi+bluetooth module??
-
I prepare for you guys!
I tried to make file card0/codec#0 to card4/codec#4 in Linux mint
and gathered more information for you!thank you so much!!!
And I drop those files into the folder, and attached screenshot . (file "111.png")
It still not work.. T_T~ -
Okay! after get off the work, I'll check and post it!
But to my knowledge, there isn't exist the kext of my mainboard.
So I can't use audio. Isn't it? I tried VoodooHD.kext, but worthless.Okay, that bios works fine. I installed OSX Sierra yesterday night. But I might it seems not stable.
Is it possible to work with sierra, right? Anyway now my system not working well...
and I don't know why. Even 'Hwsensor(Hwmonitor)' app can read only the degree of ssd. -
ROG SupremeFX Formula 2014 8-Channel High Definition Audio CODEC *4
- Supports : Jack-detection, Multi-streaming- SupremeFX Shielding Technology
- Cirrus Logic® CS4398 DAC: 120 dB SNR, -107 dB THD+N (Max. 192 kHz/ 24 -bit)
- WIMA® film capacitors- ELNA® premium audio capacitors
- TI LM4562 high-fidelity audio OP AMP(s)Audio Feature :
- Blu-ray audio layer Content Protection
- DTS Connect
- Optical S/PDIF out port(s) at back panel
- Sonic SoundStage
- Sonic SenseAmp
- Sonic Studio
- Sonic Radar III don't understand what you mean. The "CodecID".
I Just know specification of audio of my mainboardI can see the two codec in there
[ ROG SupremeFX Formula 2014 8-Channel High Definition Audio Codec ] and [ Cirrus Logic® CS4398 DAC: 120 dB SNR, -107 dB THD+N (Max. 192 kHz/ 24 -bit) ]If you want more, can you teach me where i get the information for you
then I will gather more information. I'm 100% ready for you and me -
okay.. I can wait, but I really really really want it
-
Yes I have GTX 980Ti, But I tried with and without Graphics card both.
But Unfortunately, I don't change anything on Bios. Cause my board don't work ( don't boot ).When I install that bios, I can't saw anything.
My PC don't boot. So I can't hear beep. Just waiting long time then I recognize it's not work.I really want to this motherboard for Ozmosis.. T_T
-
Yes, and I finally updated bios by FLASHBACK, but the PC don't show anything on my monitor
So I go back to original asus BIOS from ASUS Homepage. -
Hi guys. From monday, I tried so many times for set the bios into my board.
I want to update rom from this, but Ez-Flash 2 or AI Suite 3 said this is not suitable file for this rom.
So I tried to ASUS FLASHBACK function, but it doesn't works too.... ( flashback function failed )
Before, I was using GA-Z77X-D3H mainboard. And I patched bios really easy form here.
I don't know why my new mainboard doesn't. And why FLASHBACK doesn't worked.
It cannot possible to patch easily into my new mainboard? Or anyone had used that bios before me?
Please Help me! Gosu senpai! T_T
