Beiträge von LocalCrack

hello @apfel-baum

The bios from asus site is not latest it doesn't support NVME protocol so I have modded my bios my self and added NVME module.

without NVME module bios will boot form NVME but not provide full speed. I am only getting 600 MB/s MAX.

After adding NVME module I got full speed of NVME 3345 MB/s.

I never tried ubu tool.

I have changed os to High Sierra form Big Sur

I am using bios form following link https://www.win-raid.com/t5547…ios-UEFI-v-full-mods.html

I already installed windows 10 on NVME and it works fine.

If you have any latest bios then please send it to me.

I make all changes that you have suggested. little more installed at this time approx. 40% then it stopped.

Please check attached log and Config

I am using same motherboard but different processor so I have tried your configuration but didn't get success.

I am installing Big Sur on this configuration.

Do you please help me what thing do I need to change as per my below configuration

1) Processor Core i7 4770K

2) 2x CMZ16GX3M2A1866C10 16GB(8GB x2) DDR3 Ram (Insert into DIMM_A2 and DIMM_B2 Slot)
3) 3x Sata HDD (This all three is only for backup)

4) Intel 750 Series NVME inserted in PCIEX16_1 Slot (Use this for install macOS)

5) Gigabyte AMD Radeon Rx590 8GB graphics card in PCIEX16_2 Slot

I have tried myself by reading opencore Dortania guide but didn't get success

I also downloaded your EFI and generate SMbios but didn't get success.

So do you please help me to what to change for my above configuration for proper installation

My log file is also attached