Beiträge von robcodemax

Zitat von haingo

It's SCK1. The DSDT I sent you in the beginning was the one for dual socket.

OK get everything installed then we will see what to do

Zitat von haingo

no you're not wrong. I used dual cpu setup actually. But I failed to boot into mac installer so i unplugged power cable of the second socket to try.

I cant boot into recovery image now. Very likely due to the usbtoolbox. I will try with your kexts. But even I can boot now, installing from recovery will take alot of time as my internet now is tereibly slow to download mac

Please let me know what is the bios name for second cpu then we can edit the DSDT accordingly.

Zitat von haingo

It's socket 0 actually. Btw, I've used USBToolBox before. I thought we have to remove UTBDefault.kext once we get our own UTBMap.kext.

My bad...I thought you have dual cpu setup...Let me edit it for single CPU...Also is the setup going through?

So you have single CPU Motherboard or Dual CPU?

Zitat von haingo

Hurray!!! Disabling DSDT and keeping the 3 SSDTs worked. I can boot into the recovery image now

But I cannot control my USB mouse and keyboard. Let me try to use the usb mapping.

Create the UTBMap.kext using USBToolbox app and then replace the one that I have included. Also keep in mind you need the UTBDefault.kext and UTBToolbox.kext which I have already included in my EFI

Also we will try the Audio patch later if it doesn't work.

Also please give me the cpu bios name you can find this in the device manager in windows.

I think your cpu might be using SCK2 hence you got the error. I thought earlier that your PC might be using SCK0 and SCK1.

Zitat von haingo

Hm it seems to get stuck there. I think I had waited for more than 5 minutes. I can give another try. I will try to disable those SSDT too.

1. Just use the DSDT and check. Also try 3 to 4 times sometimes it gets stuck

Also try resetting the nvram.

2. If only using DSDT doesn't work then remove DSDT and only use SSDT-PMC, SSDT-PLUG and SSDT-UNC.

3. If the above two doesn't work then let me know

Zitat von haingo

HideAuxiliraly really did the trick. I use my PLUG, PMC, UNC and the fully patched DSDT as you suggested but now I face with another error below.

This error is fine as long as the installation is going forward. Is the installation going forward?

If you are stuck then don't use PLUG, PMC AND UNC

Zitat von haingo

I have tried to use your EFI with DSDTFULLPATCHED you gave along with SSDT-PMC and SSDT-PLUG generated by SSDTTime. But there is no option to boot into installer. I put the recovery image in com.apple.recovery.boot folder as mentioned here and it does show an option to boot into that with my EFI.

Though there are many SSDT files in your ACPI folder, there only 3 of them are used in your config.plist: SSDT-UNC, SSDT-EC-DESKTOP, SSDT-EC-USBX. So I have to modify the your config.plist to add 2 entries for SSDT-PMC and SSD-PLUG.
The question is: Do I need to keep your 3 files above in the modified config.plist?

PLUG, PMC, UNC and DSDT is enough. Rest everything is already added in DSDT.

If you are unable to see your EFI then

config.plist -> Misc -> Boot -> HideAuxiliraly Disable it

Also insert the pendrive in USB 2.0

You are not able to even boot or you are stuck in boot screen or what is the error message ?

Zitat von haingo

I still meet the same panic. Please find in the attachment my EFI folders utilizing both of your DSDT files to see if I have configured anything wrong.

Did you try to use my EFI Folder?

Please use my EFI Folder just remove the UT Map.kext and use your UTBkext.map. You can create this in windows using USBToolbox

Also use your SSDT-PMC and SSDT-PLUG created using SSDTTime

Please use my EFI Folder and only change the following. Rest keep it as is

In ACPI

SSDT-PMC (Create using Windows ssdttime)

SSDT-PLUG (Create using Windows ssdttime)

DSDTFULLPATCHED

and remove my SSDT-PM-ROBERT-2021 (No need of this while installing) You can create your SSDT-PM later using ssdtprgen method

Ioreg. Only GT 710

Zitat von haingo

I've installed mac on several PCs with success and all of them use OpenCore. Recently, I've installed Big Sur on a PC using X79 chinese mobo with Xeon E5 2420 v2 (socket 1356). I have never edited my DSDT to install Mac either, because the OpenCore guideline tells me not to use DSDT. But I do need to make SSDT patches (mostly SSDT-EC) and tweak config.plist in order to boot into installer successfully.

Now I'm installing Monterey on my rigs with the mobo mentioned above. I can't even boot into installer. With 2 CPU, the boot image isn't even loaded. With 1 CPU, the boot image is loaded but I get the panic as illustrated in the image above.

Both the DSDT are for 8 Core 16 Thread CPU Dual CPU

DSDT.aml (Only Modified CPU and Audio)

DSDTFULLYPATCHED.aml (Patched Audio, CPU, HPET, USBX, EC and other fixes) All the fixes that I already use.

Zitat von haingo

That can't be better. Please find in the attachment my DSDT .

Please note that I'm using 2 CPU Xeon E5 2689 as mentioned above. Thank you so much in advance.

I just need to know one thing...
1. Have you tried to install Mac?

2. Because I didn't do any DSDT editing for installing Mac...

It is only after installing the mac that I did the DSDT Patching with the help from MaLd0n.

Zitat von haingo

Hi robcodemax I have a couple of questions:

1. I thought that using DSDT in OpenCore with negate all SSDT patches, only things in DSDT will apply. But you are using DSDT with some other SSDTs. Are all of them working together?
2. I don't have a Mac to run Rehabman's MacIasl. Is there anyway to edit my DSDT in Windows?
3. Could you share me guideline for your audio patches also? My board has ALC662.
4. I'm using a Chinese mobo too, but not Huananzhi. The one I'm using looks exactly same as the one from the owner of this thread (my chipset is reported as X79 in CPU-Z instead of C062). Are all chinese mobos using the same bios firmware no matter brand they are from?
5. I have 2 CPU Xeon E5 2689 which have 8 core 16 threads in each one, give me total of 2 sockets, 16 cores and 32 threads. That means I will have to keep 2 sockets and 32 cores in my DSDT, right

1. Yes I have everything working. You give me your DSDT created in windows using ssdttime.exe and I will edit the cores and send you the patched DSDT. Also I will try to add the Audio Patch

2. I am only using SSDT-PM, SSDT-PLUG and SSDT-PMC for powermanagement and it works

Also I just upgraded to Monterey 12.1 without any issue.

Zitat von haingo

Thank you. I'll give a try.

Don't use cputscsync 1.0.5. You can use 1.0.3

Use you own DSDT (You can use it if you are using 6 Cores and 12 Thread cpu and chinese motherboard then you can use mine. If you are using more than 12 cores then use the DSDT_ORALIA..aml included with the EFI and then edit it according to your cpu cores. )

1. Create a DSDT using ssdttime in windows and then use Rehabman's MacIasl to remove the unused cores like SCK1, SCK2, SCK3. I have 6 core and 12 threads so I removed the rest leaving only 12 cores. If you are using 6 Cores and 12 Thread cpu and chinese motherboard then you can use mine. If you are using more than 12 cores then use the DSDT_ORALIA..aml included with the EFI and then edit it according to your cpu cores.

2. Also use ssdtprgen method to generate you own SSDT-PM.

3. Use ssdttime to generate your SSDT-PMC and SSDT-PLUG.

4. If you using chinese X79 Board then you can use my DSDT IT WILL WORK.

5. Also in the DSDT apply the audio patch and other patches necessary. I even have the audio working

My Specs:

Mothernoard: Huananzhi -X79 Deluxe
Processor. : E5 1650 V2
Graphics : GT 710

RAM : 32 GB

Zitat von haingo

Hello,

I have exact motherboard. My CPU is Xeon E5 2689 with 32GB of RAM and a RX 480 4GB GPU.

I keep getting the kernel panic as in the picture provided below

Please check the attached EFI folder and give me suggestions to fix this issue

Alles anzeigen

I have Huananzhi X79 and I have everything working. I have attached the EFI you can take a look. You will have to add your Patched DSDT (Don't use mine. You can use it if you are using 6 Cores and 12 Thread cpu and chinese motherboard then you can use mine. If you are using more than 6 Cores and 12 Thread cpu then use the DSDT_ORALIA..aml included with the EFI and then edit it according to your cpu cores.) Also use your SSDT-PM. Also generate new platform Info