Suchergebnisse

Your issue comes from the activated IGPU, which came on board with the new OZM-Rom.Either you try to hit the ESC-key until your screen goes red and then directly open the BIOS with the DEL-key, to be able to disable the IGPU and set den "Initial Boot Display" to "PCIe-1 Slot" or you have to remove the Nvidia Card to be able to go to your BIOS setup screen to do the mentioned changes.

Your GTX760 doesn't need more drivers than the original Apple-versions...In your case I guess you never used a Defaults.plist for your rig.Such a file should be placed on the EFI-Partition under /EF/Oz and contains the appropriate SMBIOS-entries, plus some necessary NVRAM-settings and the boot-args...Check out the linked ReadMe for Ozmosis:Version 1479mTry to use the attached one and copy it to the mentioned directory on your EFI-Partition.Afterwards reboot the machine, go into your BIOS and do …

Do you have more then one HDD/SSD in your System?If so, check if they have an /EFI/Oz-Folder in their EFI-Partition...Normale the drive which is connected to the first SATA-Port (SATA3 Port 0) gets those entries...By the way: please add your Hardware-Details from your first post either in your Signature or your Profile, in the section "About me", so anybody can relate to your situation without having to search those infos in your opening post...

BTW...I just created a patched DSDT for your board, which you can put into /EFI/Oz/Acpi/Load...With that you should get Onboard- and HDMI-Audio running, together with a couple of other nice treats...

In that case use the Ozmosis-Shell (Gear-Symbol in OZM Startmenu) and use the following commands:(Quelltext, 1 Zeile) to find all the available partitions(Quelltext, 1 Zeile) to connect to the available paritions, the "X" outlines the numbers between 0 to 9Use the ls-command in every partition to find the correct EFI-partition.With cd \EFI\Oz\Acpi\load you are able to switch the directory... ATTENTION 1: use the "\" as separator in the ShellIf your in the directory which contains the DSDT.aml-fi…

Too bad...i’m currently at a diner with friends... can you boot with a clover boot stick or a live Linux version?

Let us check this out in the evening...

Our Teamviewer Session was very successful...