Suchergebnisse

hello supergg12 ,at first- we have to know, wich revision of the mainboard are you using- the 1.0, 1.1 or the 1.2 revision?I've prepared an current version of the bios, you can use. of curse oz will be gone- and you have to build an efi, with the help of the helpers here no doubt. so no reason to sorrowi've told to an oz user and it seems to be that you have to reflash your bios with the origin bios - after that you could flash one of the following bios nvme-mod-ubu-currentedit- bios follows aft…

you've answered the most imported thing - your board revision is "1.0" that is important because there 3 versions, about 2 different version exists. ok, the dualbiosfeature is well, but it is easier to flash the right one.so, the current version- an old one will be at the gigabyte website- but that is not necessary to take a look for.i've prepeared a current a bit modded bios for your board,- the nvme-ubu-mod is a bios that allows you to put an nvme ssd via an pci-e adapter in your pci-e slot -a…

you can use the added efi from the post before it is already opencore and should run with your board, and of course- there ist no need fpr an nvme-ssd to run osx-you can still use your s-ata or m-sata ,ssd, or even hdd , it's just an option for the "future-use" with your board, if you want.i add an biospack with an order 1-3 to flash 1th the unmodded current bios, 2nd the ubu-modded oneand 3rd the nvme-and others mod. greetsedit i don't know what are the keyboard-layout currently were, so it's e…

questions:nvme-ubu-mod; do i have to have an nvme ssd drive? or can i still continue to work with my current ssd?And does this bios already have the correct parameters to start OC?I think it will also be appropriate to rearrange the efi partition with the correct settings?and which ones?answers:you have not to use an nvme drive to use your current installation of osx further - and could still use your current ssd.the bios does not have the the correct parameters it is just the origin one without…

i've already make the settings of the kext-order, maybe if you put more kext to the efi the order maybe changed, but atm it should run as it is- no need to rearrange it , it's able to use and install monterey but it should be maybe recommend to make the usb-mapping before updating to big sur or montereygreetsq:- As I understand it, I am not creating a new "OC" folder in the EFI partition?a:- yes, you have not to create one- you use and transfer the efi-folder in post 4 "supergg12-EFI.zip" that i…

have you already download the efi?

that one (efi) , wich is named " supergg12-efi-zip " is the right one and "only" efi in this threadput the efi folder to the partition, - the folder already contains the "oc" and "boot" folders

with your current hardware config you are able to use, big-sur, monterey - i've an similar configuration here

hello supergg12 ,you have an different nic card as like the z77-d"s"3h ,so the results- try the current efi from today, mabe it works- replace the folder with the current one -or one by one, the oc and the boot-foldergreetsedit- the verbosemode is still important, if your system will work correctly, you're able to disable it by yourself,- it is just an bootargument inside the config.plist

i have just uploaded it, it is the superegg12-2911-2021-efi.zip attached to the post above yours

ok, the ethernet nic is working, so far so good, that is more as before,is the wlanicon displayed or have you activated it in the settings?

at this moment it is your turn, you have to test which alcid ist the right one ,lecture :https://dortania.github.io/Ope…ridge.html#starting-pointhttps://dortania.github.io/Ope…ist/ivy-bridge.html#nvramhttps://github.com/acidanthera…alc/wiki/supported-codecshttps://dortania.github.io/Ope…#broken-imessage-and-siritools: instead of propertree you can use this, free and for different plattforms availble - https://github.com/ic005k/PlistEDPlus/releasesgreets