Ozmosis of Sierra can't load webdriver

I updated 10.12 from 10.11.6 use clover,everything goes perfect.

I decide to try Ozmosis.and there the problem come up

The arg nvda_drv=1 can't be laod in 10.12,so my Ozmosis can't load the webdriver.

can anyone give me some advice about how to fix this ?

Mainboard: asus Z97-k R2.0
Graphic card: GTX 960 4G

Now Everything goes well except webdriver

Zitat von giules

Hello and welcome in the Club!

So try this:

sudo NVRAM 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args ="nv_disable=1"

Alles anzeigen

My problem is Ozmosis can't load driver. I dont means to disable it.

Zitat von al6042

Then you should use

Code

1. sudo NVRAM 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args ="nvda_drv=1"

Or you add the part "nvda_drv=1" into the boot-args section of your Defaults.plist, which you should have on your hidden EFI-partition in the folder /EFI/Oz.
If not create one to make sure that all the NVRAM-Settings you might need are collected and saved in there, in case of a NVRAM Reset, which would delete all entries if they are only set through the terminal...

thanks for your reply ,I config this arg in my Ozdefault.config file. but it didn't works， They said that this arg is no longer work in 10.12

Zitat von Stellaris

Hi wiliam,
I don't know if you already solved the Problem since the thread is already open for a while.
Try to find out which Mac configuration your Ozmosis uses. You can do that with Ozmosis Toolbox. If you use MacPro 6,1 or iMac 15,1 or newer you could try patching your AppleGraphicsControl.kex via this Tool: AGDPFix.app.

Regards

Thanks for you reply,I used a iMac17.1 config and I've already patch the kext. the webdriver still can't be loaded.